DF30RB-44DP-0.4V(82) Hirose Electric Co Ltd, DF30RB-44DP-0.4V(82) Datasheet - Page 11

• Manufacturer Part Number: DF30RB-44DP-0.4V(82)
• Description: CONN HEADER 44POS 0.4MM SMD GOLD
• Manufacturer: Hirose Electric Co Ltd
• Series: DF30r

Specifications of DF30RB-44DP-0.4V(82)

• Connector Type: Header, Center Strip Contacts
• Number Of Positions: 44
• Pitch: 0.016" (0.40mm)
• Number Of Rows: 2
• Mounting Type: Surface Mount
• Contact Finish: Gold
• Mated Stacking Heights: 0.9mm
• Height Above Board: 0.031" (0.80mm)
• Mounting Style: SMD/SMT
• Number Of Positions / Contacts: 44
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Contact Finish Thickness: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: H11600TR

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BHandling Precautions when un-mating the connectors
Fig. A
DF30*-*DS-0.4V(81)
Receptacle
DF30*-*DP-0.4V(81)
Header
Fig. B
DF30 Series●0.4 mm Pitch, 0.9 mm Height, Board-to-Board / Board-to-FPC Connectors
Fully mated
Lift even one side, keeping both boards parallel to each other.
When handling circumstances prevent the connector from being
kept level during un-mating, one end may be lifted separate as
shown on Fig. A.
However, to utilize this procedure the connector must be mounted
on a sufficiently rigid circuit board.
Any deflection of the board during this operation may result in
damage to the connector or solder joints.
Do not attempt the start of the un-mating of the connectors from one
side (Fig. B).
When removal is from the width orientation as illustrated in the
diagram to the left, damage could be caused to the connector. Do
not perform removal from the width orientation.
A293