E3X-NA51 2M Omron, E3X-NA51 2M Datasheet - Page 3

• Manufacturer Part Number: E3X-NA51 2M
• Description: SENSOR PHOTOAMP FIBER 2M CBL
• Manufacturer: Omron
• Series: E3X-NAr
• Type: General Purposer

Specifications of E3X-NA51 2M

• Amplifier Type: Standard
• Voltage - Supply: 12 V ~ 24 V
• Output Type: PNP
• Current - Supply: 35mA
• Mounting Type: DIN Rail
• Fiber Optic Sensor Type: General Purpose
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: E3X-NA51-2M; E3XNA512M; Z2941

Ratings and Specifications
Amplifier Units
* When there are 8 or more Units mounted side-by-side, the response time will be 350 μs max.
Amplifier Unit Connectors
Item
Light source
(wavelength)
Power supply
voltage
Current
consumption
Control output
Self-diagnosis
output
Response time
Sensitivity
adjustment
Protection circuits
Timer function
Ambient illumination
(Receiver side)
Ambient
temperature range
Ambient humidity
range
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Connection method
Weight
(packed state)
Material
Accessories
Item
Rated current
Rated voltage
Contact resistance
Number of inser-
tions
Material
Weight
(packed state)
Model
Housing
Contact
NPN
output
PNP
output
Case
Cover
Model
Type
http://www.ia.omron.com/
2.5 A
50 V
20 mΩ max. (20 mVDC max., 100 mA max.)
(The above figure is for connection to the Amplifier Unit and the adjacent Connector. It does not include the conductor resistance of the cable.)
Destruction: 50 times (for connection to the Amplifier Unit and the adjacent Connector)
Polybutylene terephthalate (PBT)
Phosphor bronze/gold-plated nickel
Approx. 55 g
Red LED (680 nm)
12 to 24 VDC ±10%, ripple (p-p): 10% max.
35 mA max.
Load current: 50 mA max.; residual voltage: 1 V max.; NPN/PNP (depends on model) open collector; Light-ON/Dark-ON mode selector
None
Operate or reset: 200 μs max.
8-turn sensitivity adjuster (with indicator)
Reverse polarity, output short-
circuit, mutual interference pre-
vention (optically synchronized)
OFF-delay timer: 40 ms (fixed)
Incandescent lamp: 10,000 lux max.
Sunlight:
Operating:Groups of 1 to 3 Amplifiers: −25°C to 55°C
Storage: −30°C to 70°C (with no icing or condensation)
Operating and storage: 35% to 85% (with no condensation)
1,000 VAC at 50/60 Hz for 1 minute
Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z directions
Destruction: 500 m/s
IEC 60529 IP50 (with Protective Cover attached)
Pre-wired (standard cable length: 2 m)
Approx. 100 g
Polybutylene terephthalate (PBT)
Polycarbonate
Instruction manual
E3X-NA11
E3X-NA41
Standard models
Groups of 4 to11 Amplifiers: −25°C to 50°C
Groups of 12 to16 Amplifiers: −25°C to 45°C
Yes
E3X-NA21
E3X-NA51
20,000 lux max.
2
, for 3 times each in X, Y and Z directions
E3X-CN11
*
Amplifier Units with Cables
35 mA max.
(for 24-VDC power
supply)
None
Operate: 20 μs max.
Reset: 30 μs max.
Reverse polarity,
output shortcircuit
detection models
High-speed
E3X-NA11F
E3X-NA41F
Green LED
(520 nm)
35 mA max.
Operate or reset: 200 μs max.
Reverse polarity, output short-circuit, mutual interference prevention (optically syn-
chronized)
Mark-detecting
E3X-NAG11
E3X-NAG41
models
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Approx. 25 g
Red LED (680 nm)
IEC 60529 IP66
(with Protective
Cover attached)
Approx. 110 g
Polyethersulfone
(PES)
Water-resistant
E3X-NA11V
E3X-NA41V
models
*
IEC 60529 IP50
(with Protective
Cover attached)
Standard
connector
Approx. 55 g
Polycarbonate
Standard models
E3X-CN12
Amplifier Units with Connectors
E3X-NA6
E3X-NA8
500 VAC at 50/60
Hz for 1 minute
IEC 60529 IP66
(with Protective
Cover attached)
Standard M8
connector
Approx. 65 g
Polyethersulfone
(PES)
E3X-NA
(M8 connectors)
Water-resistant
E3X-NA14V
E3X-NA44V
models
3