2313287 Phoenix Contact, 2313287 Datasheet - Page 5

• Manufacturer Part Number: 2313287
• Description: SUBCON-PLUS-PROFIB
• Manufacturer: Phoenix Contact
• Series: SUBCONr

Specifications of 2313287

• Accessory Type: Programming Device Connector
• Number Of Positions: 9
• For Use With/related Products: D-Sub Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Other names: Q5613617

5
5.1
Figure 4
The PSM-STRIP-FC/PROFIB stripping tool (Order No.
2744623) is recommended for quick and easy stripping.
5.2
The connector enables the quick and easy connection of the
incoming and outgoing bus cable. The connector contacts
are routed to clearly arranged, color-coded IDC terminal
blocks.
The integrated termination resistor can be switched and,
when activated, simultaneously switches off the outgoing
bus cable. This enables easy startup of the bus system
segment by segment.
The strain relief is integrated in the housing half shells and is
designed for standard PROFIBUS cable type A.
The additional integrated programming connection of the
SUBCON-PLUS-PROFIB/PG/FC 90 version enables the
connection of a programming or service device without
interrupting bus operation.
104390_en_00
Connection
Stripping
Connection
To ensure reliable operation, observe the
recommended stripping lengths in Figure 4.
Stripping
6
20
14
Figure 5
•
•
•
•
•
•
Strip the cable as per the specified stripping lengths
(see Figure 4).
Remove the separating foil if necessary.
Insert the individual wires into the connection terminal
blocks as far as they will go.
Always connect the incoming bus cable to terminal
block connections 1A/1B (even at the start of the bus
system).
The outgoing bus cable is always connected to terminal
block connections 2A/2B (see Figure 5).
Note the color-coding of the connection terminal
blocks.
Finally, mount and screw tight the connection terminal
blocks. This creates the shield connection and the
strain relief for the bus cable.
Connection
SUBCON-PLUS-PROFIB…/FC90
PHOENIX CONTACT
5