A15896-04 Laird Technologies, A15896-04 Datasheet - Page 2

• Manufacturer Part Number: A15896-04
• Description: TFLEX 740 9X9"
• Manufacturer: Laird Technologies
• Type: Thermal Gap Fillerr

Specifications of A15896-04

• Featured Product: Tflex™ 700 Series
• Usage: Sheet
• Shape: Square
• Outline: 228.60mm x 228.60mm
• Thickness: 0.040" (1.02mm)
• Adhesive: Tacky - Both Sides
• Color: Gray
• Thermal Conductivity: 5.0 W/m-K
• Length: 229 mm
• Width: 229 mm
• Operating Temperature Range: - 45 C to + 200 C
• Flammability Rating: UL 94 V-0
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 926-1143

Innovative Technology
for a Connected World
TFLEX
Construction
Color
Thermal Conductivity
Hardness (Shore 00)
Specific Gravity
Thickness Range
Thickness Tolerance
UL Flammability Rating
Temperature Range
Volume Resistance
Outgassing TML
Outgassing CVCM
TM
700 TYPICAL PROPERTIES
Filled silicone sheet
1 X 10
0.020" - .200"
-45ºC to 200ºC
(0.5 - 5.0mm)
TFLEX 700
Dark Grey
5.0 W/mK
0.13%
±10%
94 V0
1.0%
1.73
13
50
ohm-cm
THR-DS-TFLEX-700 0510
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice.
Responsibility for the use and application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential
uses. Laird Technologies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses.
Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms
and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird,
Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other
product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.
A15955-00 Rev D, 5/2010.
TM
TEST METHOD
ASTM D2240
File E180840
See reliability
STANDARD THICKNESSES
Standard thickness 0.020” (0.5mm) through 0.200” (5.0mm) available in 0.010”
(0.25mm) increments.
MATERIAL NAME AND THICKNESS
Tflex
7XXX - indicates Tflex
-DC1 - one side tacky; default is both sides tacky
Data for design engineer guidance only. Observed performance varies in applica-
tion. Engineers are reminded to test the material in application.
ASTM D257
Pyncometer
ASTM E595
ASTM E595
Hot Disk™
Helium
Visual
report
NA
TM
- indicates elastomeric gap filler product line
TM
700 product line and thickness in mils (0.001-inches)
Tflex
Thermal Gap Filler
Tflex 700 Thermal Resistance
Tflex 700 Deflection
TM
700 Series