TWR-S08MM128 Freescale Semiconductor, TWR-S08MM128 Datasheet - Page 4

• Manufacturer Part Number: TWR-S08MM128
• Description: TOWER SYSTEM BOARD MC9S08MM128
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®, Flexis™r
• Type: MCUr

Specifications of TWR-S08MM128

• Contents: Board
• Processor To Be Evaluated: 9S08MM128
• Data Bus Width: 8 bit
• Interface Type: USB, CAN
• Silicon Manufacturer: Freescale
• Core Architecture: Coldfire, HCS08
• Core Sub-architecture: Coldfire V1, HCS08
• Silicon Core Number: MCF51, MC9S08
• Silicon Family Name: Flexis - MCF51MM, Flexis - S08MM
• Rohs Compliant: Yes
• For Use With/related Products: Freescale Tower System, MC9S08MM128
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Figure 2: Tower System Assembled
NOTE: Figure 2 is a Tower System without the optional
MED-EKG assembly. For details on how to assemble the
MED-EKG, please refer to Lab 1 on the DVD.
Primary edge of TWR-S08MM128 and
TWR-SER must connect to this Primary
elevator, which has components on the
bottom of the board, including the mini-
USB connector.
TOWER SYSTEM
OSBDM interface to program and debug
the S08MM128. It does not connect to
This mini-USB port is only used for
connecting pins 3 and 4 as shown.
to this is not needed in this kit.
This configures the module for
required by the labs in this kit.
Set Jumper J16 on TWR-SER
This is the TWR-SER module.
This is the mini-USB from the
Primary elevator. Connection
TWR-SER powers the whole
USB device mode, which is
the S08MM128 USB ports.
module to middle position
This mini-USB port on the
S08MM128 USB module.
the Secondary elevator.
Make sure this side is
Tower System setup.
It interfaces with the
S08MM128 USB via
this mini-USB port.
Users can test the