73S1217F-EB-LITE Maxim Integrated Products, 73S1217F-EB-LITE Datasheet - Page 6

• Manufacturer Part Number: 73S1217F-EB-LITE
• Description: BOARD EVAL 73S1217F CBL/DOC/CD
• Manufacturer: Maxim Integrated Products

Specifications of 73S1217F-EB-LITE

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

73S1217F Evaluation Board Lite User Guide
2 Evaluation Board Lite Basic Setup
Figure 2
The power supply can come from two sources:
•
•
The communication with an external host can be accommodated by either:
•
•
The board provides by default the USB CCID application. Refer to
and running the USB CCID application.
6
The +5 V coming from the USB bus (default) when connected to a computer or hub able to support USB
powered devices. In this case the ON/OFF switch, S2, has no effect and power is always on. When
the board is powered from the USB bus, the application is bus-powered and the embedded
application must be designed for this.
Any AC-DC converter block able to generate a DC power supply of 4.0 V min to 6.5 V max at 400 mA
for backup power for those applications capable of using it. This power is connected to the PJ1
connector. When using the PJ1 power input, the ON/OFF switch, S2, controls the power to the
73S1217F.
A standard USB2.0 full speed interface or
A standard RS-232 serial interface (TX/RX only).
shows the basic connections of the Evaluation Board-Lite with the external equipment.
Figure 2: 73S1217F Evaluation Board Lite Basic Connections
Section 3
for information on setting up
UG_1217F_046
Rev. 1.2