UPC2709TB-A CEL, UPC2709TB-A Datasheet - Page 15

• Manufacturer Part Number: UPC2709TB-A
• Description: IC MMIC AMP 2.5GHZ SOT 363
• Manufacturer: CEL
• Type: RF IC'sr

Specifications of UPC2709TB-A

• Current - Supply: 16mA ~ 29mA
• Frequency: 2.0GHz ~ 2.5GHz
• Gain: 30dB ~ 36.5dB
• Noise Figure: 3.5dB ~ 5dB
• P1db: 8.7dBm
• Package / Case: SC-70-6, SC-88, SOT-363
• Rf Type: Cellular, DBS, PCS
• Test Frequency: 500MHz
• Voltage - Supply: 4.5V ~ 5.5V
• Mounting Style: SMD/SMT
• Operating Frequency: 2.3 GHz
• Operating Supply Voltage: 4.5 V to 5.5 V
• Supply Current: 25 mA
• Maximum Power Dissipation: 270 mW
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

NOTES ON CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesired oscillation).
(3) The bypass capacitor should be attached to V
(4) The inductor must be attached between V
(5) The DC cut capacitor must be attached to input pin and output pin.
RECOMMENDED SOLDERING CONDITIONS
conditions other than those recommended below, contact your NEC sales representative.
SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).
Infrared Reflow
VPS
Wave Soldering
Partial Heating
Soldering Method
This product should be soldered under the following recommended conditions.
Note After opening the dry pack, keep it in a place below 25°C and 65% RH for the allowable storage period.
Caution Do not use different soldering methods together (except for partial heating).
For details of recommended soldering conditions for surface mounting, refer to information document
All the ground pins must be connected together with wide ground pattern to decrease impedance difference.
accordance with desired frequency.
Package peak temperature: 235°C or below
Time: 30 seconds or less (at 210°C)
Count: 3, Exposure limit: None
Package peak temperature: 215°C or below
Time: 40 seconds or less (at 200°C)
Count: 3, Exposure limit: None
Soldering bath temperature: 260°C or below
Time: 10 seconds or less
Count: 1, Exposure limit: None
Pin temperature: 300°C or below
Time: 3 seconds or less (per side of device)
Exposure limit: None
Note
Soldering Conditions
Data Sheet P13443EJ3V0DS
CC
CC
and output pins. The inductance value should be determined in
Note
Note
Note
line.
Recommended Condition Symbol
For soldering methods and
WS60-00-1
VP15-00-3
µ µ µ µ PC2710TB
IR35-00-3
–
13