UPC8204TK-A CEL, UPC8204TK-A Datasheet - Page 32

• Manufacturer Part Number: UPC8204TK-A
• Description: IC AMP VAR GAIN 6-MINIMOLD
• Manufacturer: CEL
• Type: RF IC'sr

Specifications of UPC8204TK-A

• Current - Supply: 11.5mA
• Frequency: 800MHz ~ 2.5GHz
• Gain: 14.5dB
• Noise Figure: 7.5dB
• Package / Case: 6-MINIMOLD
• Rf Type: PHS, WLAN
• Test Frequency: 1.9GHz
• Voltage - Supply: 2.7V ~ 3.3V
• Mounting Style: SMD/SMT
• Operating Frequency: 2.5 GHz
• Operating Supply Voltage: 2.7 V to 3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• P1db: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

8.
9.
methods and conditions other than those recommended below, contact your nearby sales office.
32
Infrared Reflow
Wave Soldering
Partial Heating
Caution Do not use different soldering methods together (except for partial heating).
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as wide as possible to minimize ground impedance (to prevent undesired oscillation).
(3) The bypass capacitor should be attached to the V
(4) Impedance matching circuit must be each externally attached to input and output ports.
(5) The DC capacitor must be attached to input terminal.
This product should be soldered and mounted under the following recommended conditions.
Soldering Method
NOTES ON CORRECT USE
RECOMMENDED SOLDERING CONDITIONS
All the ground pins must be connected together with wide ground pattern to decrease impedance difference.
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (terminal temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
Data Sheet PU10408EJ02V0DS
Soldering Conditions
CC
terminal.
: 260°C or below
: 120±30 seconds
: 260°C or below
: 1 time
: 350°C or below
: 3 seconds or less
: 10 seconds or less
: 60 seconds or less
: 3 times
: 0.2%(Wt.) or below
: 10 seconds or less
: 0.2%(Wt.) or below
: 0.2%(Wt.) or below
Condition Symbol
µ
WS260
HS350
For soldering
IR260
PC8204TK