101-1285 Rabbit Semiconductor, 101-1285 Datasheet - Page 69

• Manufacturer Part Number: 101-1285
• Description: DEV KIT DELUXE MINICORE RCM5600W
• Manufacturer: Rabbit Semiconductor
• Series: MiniCore™r
• Type: Transceiver, 802.11 b/gr

Specifications of 101-1285

• Frequency: 2.4GHz
• Processor To Be Evaluated: Rabbit 5000
• Processor Series: RCM5600W
• Interface Type: RS-232, USB, PCI
• Maximum Operating Temperature: + 55 C
• Minimum Operating Temperature: - 30 C
• Operating Supply Voltage: 3.15 V to 3.45 V
• Silicon Manufacturer: Rabbit Semiconductor
• Silicon Family Name: RabbitCore
• Kit Contents: Board
• Features: On-board Single-Chip 802.11b/g Transceiver, Built-In Web Server
• Development Tool Type: Hardware /
• Rohs Compliant: Yes
• For Use With/related Products: RCM5600W
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1161

•
OEM User’s Manual
Once you have compiled the sample program and it is running, LED DS1 will go on
with a brief toggle off when a ping is sent. LED DS1 will go off for a longer duration
when a ping is received. LED DS1 is controlled by PD0.
PINGLED_WPA2_CCMP.C
(Wi-Fi Protected Access with Pre-Shared Key).). WPA is a more secure replacement
for WEP. The implementation in the sample program uses the Advanced Encryption
Standard (AES) based algorithm, also known as the CCMP (Counter Mode with Cipher
Block Chaining Message Authentication Code Protocol) cypher suite.
Apart from the configuration of
of the code is identical to the case without WPA2 PSK. Indeed, most of the TCP/IP
sample programs should work with WPA2 CCMP simply by using the same configura-
tion settings.
Configure your access point for WPA2 PSK before you run this sample program.
Specify the CCMP cypher suite, and enter a suitable pre-shared key. The key may be
entered either as 64 hexadecimal digits or as an ASCII string of up to 63 characters.
Authentication should be set to “open system,” which basically means that knowingt
the key is sufficient to allow access.
Now change
You may modify
the outgoing pings.
Uncomment the
Once you have compiled the sample program and it is running, LED DS1 will go on
with a brief toggle off when a ping is sent. LED DS1 will go off for a longer duration
when a ping is received. LED DS1 is controlled by PD0.
TIP: There is a good chance of typos since the key is long. First, enter the key in this
TIP: For an initial test, it may be easier to use the 64 hex digit form of the key rather than
sample program macro, then copy and paste it to your access point. This ensures that
both the RCM5600W and the access point have the same key.
the ASCII passphrase. A passphrase requires considerable computation effort, which
delays the startup of the sample program by about 30 seconds.
PING_WHO
VERBOSE
PING_DELAY
and
—This sample program demonstrates the use of WPA2 PSK
define to see the incoming ping replies.
IFC_WIFI_SSID
to change the amount of time in milliseconds between
WPA2_CCMP
at the top of the sample program, the rest
to the host and SSID you want to ping.
63