EVAL_PAN4555 Panasonic - ECG, EVAL_PAN4555 Datasheet - Page 6

• Manufacturer Part Number: EVAL_PAN4555
• Description: ZIGBEE DEVELOPMENT KIT PAN4555
• Manufacturer: Panasonic - ECG
• Series: PAN4555r
• Type: Zigbeer

Specifications of EVAL_PAN4555

• Frequency: 2.4GHz
• For Use With/related Products: PAN4555
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: EVAL_PAN4555; P14157; Q3510557

CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
EvalPAN4555
5.1.
4. OPERATION OF THE TESTBOARD
5. POWER SUPPLY
Panasonic Electronic Devices (EUROPE) GmbH
If not already done please follow the basic setting up instructions as in
Check if the jumper plugs are set as indicated in Figure 2. The functions of the jumpers are as
follows:
* An amperemeter for measuring module current can be inserted instead of the jumper
** +5Vdc supply (independent on JP3 and JP4 settings) option is provided for application demos.
Check if the port switches S1 near to the COM2 connector for RS232 are all set to off position
except the selected UART as noted in Figure 2/Table 3.
D.C. POWER FROM A POWER SUPPLY
It is not used on PAN4555 carrierboard.
Set the power switch SW7 to the position 2 = off.
Connect a power supply with 7-9VDC to one of the power inputs (P1 or P2).
In case of P1 use a plug with 5,5mm diameter and the positive terminal at the centre contact.
For use of the P2, 2mm contacts the black socket P2-X1 is the negative/ground contact and
the red socket P2-X2 is the positive terminal.
A linear regulator on the testboard regulates the input voltage down to the +5V DC board
supply. A second linear regulator regulates the +5V DC down to the module VCC supply of
2,1/2,7/3,4Vdc
European Technology Center
jumper name
A
B
C
D
JP2
JP3
JP4
JP7
function
Vcc for module in Slot A*
Vcc for module in Slot B*
Vcc for module in Slot C*
Vcc for module in Slot D*
5Vdc feed to Slots A, B, C, D**
Vcc setting 2.1-2.7-3.4V; see Table 2
Vcc setting 2.1-2.7-3.4V; see Table 2
Vcc regulator output feed to A, B, C, D
EvalBoard PAN4555
PANASONIC’S CODE
PRELIMINARY
APPROVED
genehmigt
to set as in Figure 2
do not care
do not care
yes
do not care
no
no for Vcc=2.7Vdc default
yes for Vcc=2.7Vdc default
yes
No.
DS-Eval4555-2400
PAGE
Seite
DATE
Datum
CHECKED
geprüft
Chapter 2
(Table 1)
30.03.2007
6 of 16
DESIGNED
Erstellt
REV.
01