101-1284 Rabbit Semiconductor, 101-1284 Datasheet - Page 17

• Manufacturer Part Number: 101-1284
• Description: DEV KIT STANDARD MINI RCM5600W
• Manufacturer: Rabbit Semiconductor
• Series: MiniCore™r
• Type: Transceiver, 802.11 b/gr

Specifications of 101-1284

• Frequency: 2.4GHz
• Wireless Frequency: 2.4 GHz
• Interface Type: USB
• Operating Voltage: 3.3 V
• Output Power: 19 dBm
• Antenna: U.FL Connector
• Operating Temperature Range: - 30 C to + 55 C
• Silicon Manufacturer: Rabbit Semiconductor
• Silicon Family Name: RabbitCore
• Kit Contents: Board
• Features: On-board Single-Chip 802.11b/g Transceiver, Built-In Web Server
• Development Tool Type: Hardware /
• Rohs Compliant: Yes
• For Use With/related Products: RCM5600W
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1160

2.1 Install Dynamic C
To develop and debug programs for the RCM5600W modules (and for all other Rabbit
hardware), you must install and use Dynamic C.
If you have not yet installed Dynamic C version 10.50 (or a later version), do so now by
inserting the Dynamic C CD from the Development Kit in your PC’s CD-ROM drive. If
autorun is enabled, the CD installation will begin automatically.
If autorun is disabled or the installation does not start, use the Windows
or Windows Disk Explorer to launch
The installation program will guide you through the installation process. Most steps of the
process are self-explanatory.
Once your installation is complete, you will have up to three new icons on your PC desk-
top. One icon is for Dynamic C, another opens the documentation menu, and the third is for
the Rabbit Field Utility, a tool used to download precompiled software to a target system.
If you have purchased any of the optional Dynamic C modules, install them after installing
Dynamic C. The modules may be installed in any order. You must install the modules in
the same folder where Dynamic C was installed.
OEM User’s Manual
This chapter describes the RCM5600W hardware in more detail, and
explains how to set up and use the accompanying Interface Board.
NOTE: This chapter (and this manual) assume that you have the RCM5600W Develop-
ment Kit. If you purchased an RCM5600W module by itself, you will have to adapt the
information in this chapter and elsewhere to your test and development setup.
setup.exe
2. G
from the root folder of the CD-ROM.
ETTING
S
Start | Run
TARTED
menu
11