X24-019PKC-U Digi International/Maxstream, X24-019PKC-U Datasheet - Page 31
![no-image](/images/no-image-200.jpg)
X24-019PKC-U
Manufacturer Part Number
X24-019PKC-U
Description
MODEM RF 2.4GHZ 19.2KBPS USB
Manufacturer
Digi International/Maxstream
Series
XStream™r
Specifications of X24-019PKC-U
Function
Transceiver, Modem
Modulation Or Protocol
FHSS
Frequency
2.4GHz ~ 2.4835GHz
Applications
General Purpose
Interface
USB
Sensitivity
-102dBm
Power - Output
17dBm (50mW)
Data Rate - Maximum
20 kbps
Voltage - Supply
5V
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
XStream‐PKG‐U™ USB RF Modem – Product Manual v4.2B5 [2006.02.27]
OEM Labeling Requirements
Antenna Usage
Antenna Warning
Label Warning
Figure A‐01. Required FCC Label for OEM products containing 9XStream (900 MHz) RF Modem
Contains FCC ID: OUR9XSTREAM
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
accept any interference received, including interference that may cause undesired operation.
Figure A‐02. Required FCC Label for OEM products containing 24XStream (2.4 GHz) RF Modem
Contains FCC ID: OUR-24XSTREAM
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
accept any interference received, including interference that may cause undesired operation.
RF Exposure
The preceding statement must be included as a CAUTION statement in manuals for OEM products
to alert users of FCC RF Exposure compliance.
MaxStream radio modems are pre-FCC approved for use in fixed base station and mobile
applications. As long as the antenna is mounted at least 20 cm (8 in) from nearby persons, the
application is considered a mobile application. If the antenna will be mounted closer than 20 cm
to nearby persons, then the application is considered “portable” and requires an additional test
performed on the final product. This test is called the Specific Absorption Rate (SAR) testing and
measures the emissions from the radio modem and how they affect the person.
Over 100 additional antennas have been tested and are approved for use with MaxStream 900
MHz Radio Modems (including “Mag Mount”, “Dome”, “Multi-path” and “Panel” antennas).
Because of the large number of approved antennas, MaxStream requests that you send specific
information about an antenna you would like to use with the modem and MaxStream will
evaluate whether the antenna is covered under our FCC filing.
© 2006 MaxStream, Inc. Confidential and Proprietary
WARNING
WARNING:
WARNING:
(i.)
(i.)
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling
requirements are met. This includes a clearly visible label on the outside of the
final product enclosure that displays the contents shown in the figure below.
This device has been tested with Reverse Polarity SMA connectors with the
antennas listed in Tables A-01 & A-02 of Appendix A. When integrated in OEM
products, fixed antennas require installation preventing end-users from replacing
them with non-approved antennas. Antennas not listed in the tables must be
tested to comply with FCC Section 15.203 (unique antenna connectors) and Section
15.247 (emissions).
This equipment is approved only for mobile and base station transmitting devices,
separation distances of (i) 20 centimeters or more for antennas with gains < 6 dBi
or (ii) 2 meters or more for antennas with gains ≥ 6 dBi should be maintained
between the antenna of this device and nearby persons during operation. To
ensure compliance, operation at distances closer than this is not recommended.
this device may not cause harmful interference and
this device may not cause harmful interference and
(ii.)
(ii.)
this device must
this device must
31