XT09-PKI-EA Digi International/Maxstream, XT09-PKI-EA Datasheet - Page 12
![no-image](/images/no-image-200.jpg)
XT09-PKI-EA
Manufacturer Part Number
XT09-PKI-EA
Description
MODEM RF 900MHZ 1W ETHER W/ACC
Manufacturer
Digi International/Maxstream
Series
XTend™r
Datasheet
1.XT09-PKI-E.pdf
(62 pages)
Specifications of XT09-PKI-EA
Function
Transceiver, Modem
Modulation Or Protocol
FHSS, FSK
Frequency
900MHz
Interface
RJ-45 Ethernet
Sensitivity
-110dBm
Data Rate - Maximum
10 kbps
Voltage - Supply
7 V ~ 28 V
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Power - Output
-
Applications
-
9XTend‐PKG‐E™ Ethernet RF Modem – Product Manual v2.x4x [2007.01.04]
2.3. Telnet Communications
2.3.1. Test Communications (Telnet Loopback)
In addition to com port communications, Telnet communications are also supported.
A wireless link can be tested by connecting to the specific IP address and port number.
Test a Wireless Link (Telnet Connection):
Figure 2‐08. Telnet Interface (connect to PKG‐E having an IP address of 192.168.0.168)
Figure 2‐09. Telnet Interface (Sent & Echoed back characters)
1.
2.
3.
[Remaining steps are for Microsoft Windows users]
4.
5.
© 2007 MaxStream, Inc., Confidential & Proprietary ‐ All Rights Reserved
At the command prompt, type: telnet xxx.xxx.xxx.xxx 14001 <CR>
Follow steps in the "Ethernet RF Modem Discovery" section [p9].
Setup hardware as shown in the 'Hardware Setup for Loopback Test' section of previous
page [Figure 2-06].
If using Windows: Select (Start ' Run); then type "cmd" (without quotation marks) in the
text box of the "Run" dialog box. Then select the 'OK' button.
If using Linux or UNIX: Run a command shell.
If using Mac OS X: Run (Applications ' Utilities ' Terminal).
("xxx.xxx.xxx.xxx" is the IP address of the Ethernet RF Modem, "14001" is the port number
and "<CR>" stands for carriage return or 'Enter' key.) [Figure 2-08]
Begin typing characters into the Telnet session window [Figure 2-09].
--> Characters typed should be echoed back to the screen. With each character typed, the
"Data Out" and "Data In" LEDs should flash briefly on each of the PKG RF Modems.
The wireless link can be double-checked by turning off the XTend-PKG-R RS-232/485 RF
Modem (leaving the PKG-E Ethernet RF Modem on) and sending characters. When the PKG-
R is turned off, characters should not be echoed back.
12