MTCBA-C-EN-N14-NAM Multi-Tech Systems, MTCBA-C-EN-N14-NAM Datasheet - Page 13

• Manufacturer Part Number: MTCBA-C-EN-N14-NAM
• Description: MODEM CDMA ETHERNET US ALLTEL
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® CDMAr

Specifications of MTCBA-C-EN-N14-NAM

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz
• Applications: General Purpose
• Interface: RJ-45
• Data Rate - Maximum: 153.6 kbps
• Features: Alltel
• Voltage - Supply: 5V
• Package / Case: Module with Case
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power - Output: -
• Sensitivity: -

Multi-Tech Systems, Inc. Quick Start Guide
Important Note About Submit and Save & Restart
Click the Submit button located at the bottom of most screens to
save any changes you make. Then you must click the Save &
Restart button in order for your settings to take effect. Save &
Restart does not have to be executed after each screen; you can
change and Submit several screens, and then click Save &
Restart. The Save & Restart button is located on the Menu bar.
PPP Authentication
Idle Time Out –
active before disconnecting. Setting the value to zero causes
the link to stay active continuously.
Dial Number –
you to the Internet.
APN –
Init String –
Authentication Type –
authentication protocol you want to use to negotiate with the
remote peer. PAP, CHAP, or PAP-CHAP.
Default = PAP-CHAP
User Name –
remote peer).
Password –
remote peer).
For GPRS and EDGE, the number is *99***1#.
For CDMA, the number is #777
wireless service provider.
For GPRS & EDGE: Include the Access Point Name:
AT+CGDCONT=1,"IP","<APN>"
The APN (Access Point Name) is assigned by your
MultiModem Wireless Modem with Ethernet Interface
5 modem initialization strings are allowed.
Enter the PPP Password (it authenticates the
Enter the PPP User Name (it authenticates the
Enter the dial number. This number connects
Sets the amount of time the PPP link stays
Click the button corresponding to the
13