ENW-89811K4CF Panasonic - ECG, ENW-89811K4CF Datasheet - Page 13

• Manufacturer Part Number: ENW-89811K4CF
• Description: MOD BLUETOOTH PAN1321
• Manufacturer: Panasonic - ECG

Specifications of ENW-89811K4CF

• Frequency: 2.4GHz
• Modulation Or Protocol: Bluetooth v2.0+EDR, Class 2
• Applications: General Purpose
• Power - Output: 2.5dBm
• Sensitivity: -86dBm
• Voltage - Supply: 2.9 V ~ 4.1 V
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q5749238

PAN1321-SPP
ENW89811K4CF
General Device Overview
The UART interface is used for communication between the host and PAN1321-SPP. The lines UARTTXD and
UARTRXD are used for commands, events and data. The lines UARTRTS and UARTCTS are used for hardware
flow control.
Low power mode control of PAN1321-SPP and the host can be implemented in by using the pins P0.14 and P0.0.
P0.14 is used by the host to allow PAN1321-SPP to enter low power mode and P0.0 is used by PAN1321-SPP to
wake-up the host when attention is required. Additionally, the host could hardware reset PAN1321-SPP using the
RESET# pin.
Power is supplied to a single VSUPPLY input from which internal regulators can generate all required voltages.
The UART and the GPIO’s interfaces have separate supply voltages so that they can comply with host signaling.
1.6
FW version
PAN1321-SPP is available in different versions. Please check corresponding release documents for latest
information. The identifier about the software version will be visible on the module, please refer to
Figure
5, here
it is xx.
User’s Manual
13
Revision 3.1, 2011-01-18
Hardware Description