AWA24S Artaflex Inc, AWA24S Datasheet - Page 4

• Manufacturer Part Number: AWA24S
• Description: MODULE POWER AMPLIFIER
• Manufacturer: Artaflex Inc
• Series: WirelessUSB™r

Specifications of AWA24S

• Frequency: 2.4GHz
• Data Rate - Maximum: 1Mbps
• Modulation Or Protocol: DSSS, GFSK
• Applications: Wireless Modules
• Power - Output: -5dBm ~ 20dBm
• Sensitivity: -93dBm
• Voltage - Supply: 2.5 V ~ 3.6 V
• Current - Receiving: 23mA
• Current - Transmitting: 195mA
• Data Interface: Connector, 2 x 6 Header, 2mm Pitch
• Antenna Connector: On-Board, Chip
• Operating Temperature: 0°C ~ 70°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Other names: 748-1003

2.4GHz Radio Module with Integrated Power Amplifier
AWA24S
Data Sheet
The device registers may be written to or read from 1 byte at a time, or several sequential register locations may be
written/read in a single SPI transaction using incrementing burst mode. In addition to single byte configuration registers, the
device includes register files; register files are FIFOs written to and read from using non-incrementing burst SPI transactions.
The IRQ pin function may optionally be multiplexed onto the MOSI pin; when this option is enabled the IRQ function is not
available while the
pin is low. When using this configuration, user firmware should ensure that the MOSI pin on the
AWA24S is in a high impedance state whenever the
pin is high.
The SPI interface is not dependent on the internal 12-MHz clock, and registers may therefore be read from or written to while
the device is in sleep mode, and the 12-MHz oscillator disabled.
Figure 2 – SPI Transaction Format
Figure 3 - SPI Single Read Sequence
Figure 4 - SPI Incrementing Burst Read
Sequence
Artaflex Inc.
DSAWA24S Rev 2v6
215 Konrad Crescent
Revised October 6, 2008
Markham, Ontario, Canada
L3R8T9
Page 4 of 15
http://www.artaflexmodules.com
905-479-0148