XT09-MI Digi International/Maxstream, XT09-MI Datasheet - Page 62

• Manufacturer Part Number: XT09-MI
• Description: MODULE RF 900MHZ 1W 115K W/MMCX
• Manufacturer: Digi International/Maxstream

Specifications of XT09-MI

• Frequency: 900MHz
• Modulation Or Protocol: FHSS, FSK
• Power - Output: 1W
• Sensitivity: -100dBm
• Voltage - Supply: 2.8 V ~ 5.5 V
• Current - Receiving: 80mA
• Antenna Connector: MMCX
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS non-compliant
• Applications: -
• Memory Size: -
• Data Interface: -
• Data Rate - Maximum: -
• Current - Transmitting: -

9XTend™ OEM RF Module ‐ Product Manual v2.x4x [2007.01.04]
Adapters
NULL Modem Adapter (male-to-male)
NULL Modem Adapter (female-to-female)
Serial Loopback Adapter
The development kit includes several adapters that facilitate the following functions:
Part Number: JD2D2-CDN-A (Black, DB-9 M-M) The male-to-male NULL modem adapter is
used to connect two DCE devices. A DCE device connects with a straight-through cable to the male
serial port of a computer (DTE).
Figure B‐05. Male NULL modem adapter and pinouts
Figure B‐06. Example of a MaxStream Radio Modem (DCE Device) connecting to another DCE device)
Part Number: JD3D3-CDN-A (Gray, DB-9 F-F) The female-to-female NULL modem adapter is
used to verify serial cabling is functioning properly. To test cables, insert the female-to-female
NULL modem adapter in place of a pair of module assemblies (RS-232 interface board + XTend RF
Module) and test the connection without modules in the connection.
Figure B‐07. Female NULL modem adapter and pinouts
Part Number: JD2D3-CDL-A (Red, DB-9 M-F) The serial loopback adapter is used for range
testing. During a range test, the serial loopback adapter configures the module to function as a
repeater by looping serial data back into the radio for retransmission.
Figure B‐08. Serial loopback adapter and pinouts
© 2007 MaxStream, Inc.
• Performing Range Tests
• Testing Cables
• Connecting to other RS-232 DCE and DTE devices
• Connecting to terminal blocks or RJ-45 (for RS-485/422 devices)
Appendix B: Development Guide
62