MC13213 Freescale Semiconductor, MC13213 Datasheet - Page 2

• Manufacturer Part Number: MC13213
• Description: IC TXRX RF 2.4GHZ FLSH 60K 71LGA
• Manufacturer: Freescale Semiconductor
• Series: MC1321xr

Specifications of MC13213

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 3dBm
• Sensitivity: -92dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 42mA
• Current - Transmitting: 35mA
• Data Interface: PCB, Surface Mount
• Memory Size: 60kB Flash, 4kB RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 71-LGA
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Wireless Frequency: 2.4 GHz to 2.48 GHz
• Interface Type: SPI
• Output Power: 0 dBm to 2 dBm
• Operating Supply Voltage: 2 V to 3.4 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Supply Current: 42 mA
• Minimum Operating Temperature: - 40 C
• Protocol Supported: 802.15.4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MCU allows the communications stack and also the application to reside on the same system-in-package
(SIP). The MC1321x family is organized as follows:
Applications include, but are not limited to, the following:
2
•
•
•
•
•
The MC13211 has 16KB of flash and 1KB of RAM and is an ideal solution for low cost,
proprietary applications that require wireless point-to-point or star network connectivity. The
MC13211 combined with the Freescale Simple MAC (SMAC) provides the foundation for
proprietary applications by supplying the necessary source code and application examples to get
users started on implementing wireless connectivity.
The MC13212 contains 32K of flash and 2KB of RAM and is intended for use with the Freescale
fully compliant 802.15.4 MAC. Custom networks based on the 802.15.4 Standard MAC can be
implemented to fit user needs. The 802.15.4 Standard supports star, mesh and cluster tree
topologies as well as beaconed networks.
The MC13213 contains 60K of flash and 4KB of RAM and is also intended for use with the
Freescale fully compliant 802.15.4 MAC and the fully ZigBee compliant Freescale BeeStack.
Residential and commercial automation
— Lighting control
— Security
— Access control
— Heating, ventilation, air-conditioning (HVAC)
— Automated meter reading (AMR)
Industrial Control
— Asset tracking and monitoring
— Homeland security
— Process management
— Environmental monitoring and control
However, for proper performance of the radio the following modem registers must be
over-programmed:
These registers must be over-programmed for MC1321x devices in which the modem Chip_ID
Register 0x2C reads 0x6800.
•
•
The MC1321x now uses an updated version of the 689S08A 8-bit
microprocessor to correct errata associated with the onboard FLL and
reset pin. Refer to the associated errata for this new device, Document
Number MSE9S08GB60A_4L11Y, on the Freescale web site.
The MC1321x also now uses an updated version of the transceiver
device that is functionally fully compliant with earlier versions of the
transceiver.
Register 0x31 to 0xA0C0
Register 0x34 to 0xFEC6
MC13211/212/213 Technical Data, Rev. 1.8
WARNING
Freescale Semiconductor