X09-009NSC-TX Digi International/Maxstream, X09-009NSC-TX Datasheet - Page 47
![no-image](/images/no-image-200.jpg)
X09-009NSC-TX
Manufacturer Part Number
X09-009NSC-TX
Description
MOD RF TX 900MHZ 9600BPS W/RPSMA
Manufacturer
Digi International/Maxstream
Specifications of X09-009NSC-TX
Frequency
900MHz
Data Rate - Maximum
19.2kbps
Modulation Or Protocol
FSK
Power - Output
100mW
Sensitivity
-110dBm
Voltage - Supply
5V
Current - Receiving
50mA
Current - Transmitting
140mA
Data Interface
PCB, Through Hole
Antenna Connector
RP-SMA
Operating Temperature
0°C ~ 70°C
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Applications
-
Memory Size
-
XStream™ OEM RF Module – Product Manual v5.x00 [2006.02.24]
Append
FCC Certification
ix A: Agency C
The XStream OEM RF Module complies with Part 15 of the FCC rules and regulations. Complian
with the labeling requirements, FCC notices and antenna usage guidelines is required.
To fulfill the FCC Certification requirements, the OEM must comply with the following FCC
regulations:
1.
2.
FCC Notices:
IMPORTANT: The 9XStream (900 MHz) and 24XStream (2.4 GHz) OEM Modules have been certified b
the FCC for use with other products without any further certification (as per FCC section 2.1091).
Changes or modifications not expressly approved by MaxStream could void the user’s authority to
operate the equipment.
IMPORTANT: OEMs must test their final product to comply with unintentional radiators (FCC section
15.107 and 15.109) before declaring compliance of their final product to Part 15 of the FCC Rules.
IMPORTANT: The XStream OEM RF Modules have been certified for remote and base radio
applications. If the XStream will be used for portable applications, the device must undergo SAR
testing.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
© 2006 MaxStream, Inc. Confidential and Proprietary
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio/TV technician for help.
The system integrator must ensure that the text on the external label provided with this
device is placed on the outside of the final product [Figure A.1 for 900 MHz operations or
Figure A.2 for 2.4 GHz operations].
The XStream OEM RF Module may be used only with Approved Antennas that have been
tested with this module. [Table A-01 or Table A-02]
connected.
ertifications
47
ce
y