MC13192FC Freescale Semiconductor, MC13192FC Datasheet - Page 15

• Manufacturer Part Number: MC13192FC
• Description: IC RF TRANSCEIVER 2.4GHZ 32-QFN
• Manufacturer: Freescale Semiconductor

Specifications of MC13192FC

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: AMR, HID, HVAC, ISM
• Power - Output: -3dBm ~ 4dBm
• Sensitivity: -92dBm
• Voltage - Supply: 2 V ~ 3.4 V
• Current - Receiving: 37mA
• Current - Transmitting: 30mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-QFN
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (typ): 2.5/3.3V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Compliant
• Other names: Q1982232

Freescale Semiconductor
1
2
3
The transceiver GPIO pins default to inputs at reset. There are no programmable pullups on these pins. Unused GPIO pins
should be tied to ground if left as inputs, or if left unconnected, they should be programmed as outputs set to the low state.
During low power modes, input must remain driven by MCU.
By default MISO is tri-stated when CE is negated. For low power operation, miso_hiz_en (Bit 11, Register 07) should be set
to zero so that MISO is driven low when CE is negated.
Pin #
EP
20
21
22
23
24
25
26
27
28
29
30
31
32
IRQ
VDDD
VDDINT
GPIO5
GPIO6
GPIO7
XTAL1
XTAL2
VDDLO2
VDDLO1
VDDVCO
VBATT
VDDA
Ground
Pin Name
1
1
1
Digital Output
Power Output
Power Input
Digital Input/Output
Digital Input/Output
Digital Input/Output
Input
Input/Output
Power Input
Power Input
Power Output
Power Input
Power Output
Type
Table 8. Pin Function Description (continued)
MC13192 Technical Data, Rev. 3.3
Active Low Interrupt Request.
Digital regulated supply bypass.
Digital interface supply & digital regulator input.
Connect to Battery.
General Purpose Input/Output 5.
General Purpose Input/Output 6.
General Purpose Input/Output 7.
Crystal Reference oscillator input.
Crystal Reference oscillator output
Note: Do not load this pin by using it as a 16 MHz
LO2 VDD supply. Connect to VDDA externally.
LO1 VDD supply. Connect to VDDA externally.
VCO regulated supply bypass.
Analog voltage regulators Input. Connect to Battery.
Analog regulated supply Output. Connect to directly
VDDLO1 and VDDLO2 externally and to PAO±
through a frequency trap.
Note: Do not use this pin to supply circuitry external to
the chip.
External paddle / flag ground.
source. Measure 16 MHz output at Pin 15,
CLKO, programmed for 16 MHz. See the
MC13192 Reference Manual for details.
Description
Open drain device.
Programmable 40
k
Interrupt can be
serviced every 6 µs
with <20 pF load.
Optional external
pull-up must be >4
k
Decouple to ground.
2.0 to 3.4 V.
Decouple to ground.
See Footnote 1
See Footnote 1
See Footnote 1
Connect to 16 MHz
crystal and load
capacitor.
Connect to 16 MHz
crystal and load
capacitor.
Decouple to ground.
Decouple to ground.
Decouple to ground.
Connect to ground.
Ω
Ω
.
internal pull-up.
Functionality
Pin Connections
15