SRI512-W4/1GE STMicroelectronics, SRI512-W4/1GE Datasheet - Page 8

no-image

SRI512-W4/1GE

Manufacturer Part Number
SRI512-W4/1GE
Description
IC MEM 13.56MHZ 512BIT EEPROM
Manufacturer
STMicroelectronics
Series
SRI512r
Datasheet

Specifications of SRI512-W4/1GE

Rf Type
Read / Write
Frequency
13.56MHz
Features
ISO14443-B
Package / Case
Wafer
Operating Temperature (max)
85C
Operating Temperature Classification
Commercial
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Signal description
2
2.1
8/47
The SRI512 contactless EEPROM can be randomly read and written in block mode (each
block containing 32 bits). The instruction set includes the following nine commands:
The SRI512 memory is organized in three areas, as described in
resettable OTP (one-time programmable) area in which bits can only be switched from 1 to
0. Using a special command, it is possible to erase all bits of this area to 1.
The second area provides two 32-bit binary counters that can only be decremented from
FFFF FFFFh to 0000 0000h, and gives a capacity of 4,294,967,296 units per counter.
The last area is the EEPROM memory. It is accessible by block of 32 bits and includes an
auto-erase cycle during each Write_block command.
Figure 2.
Signal description
AC1, AC0
The pads for the Antenna Coil. AC1 and AC0 must be directly bonded to the antenna.
Read_block
Write_block
Initiate
Pcall16
Slot_marker
Select
Completion
Reset_to_inventory
Get_UID
Die floor plan
Doc ID 13263 Rev 5
AC0
AC1
AI09055
Table
3. The first area is a
SRI512

Related parts for SRI512-W4/1GE