OPB685 TT Electronics/Optek Technology, OPB685 Datasheet - Page 3

• Manufacturer Part Number: OPB685
• Description: SWITCH LOGIC OPTICAL FLAG PCB
• Manufacturer: TT Electronics/Optek Technology
• Series: Photologic®r

Specifications of OPB685

• Sensing Method: Optical Flag
• Output Configuration: Pull-Up Resistor, Buffer
• Mounting Type: Through Hole
• Current - Supply: 5.5mA
• Voltage - Supply: 4.5 V ~ 16 V
• Response Time: 30ns
• Package / Case: PCB Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Sensing Distance: -

Photologic® Optical Flag Switch
OPB685, OPB685-3, OPB686, OPB687, OPB688
OPB695, OPB696, OPB697, OPB698 Series
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
Absolute Maximum Ratings
Input Diode
Output Photologic®
Notes:
Storage & Operating Temperature Range
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron]
Reverse Voltage
Continuous Forward Current
Peak Forward Current
Total Device Power Dissipation
Supply Voltage, V
Duration of Output Short to V
Voltage at Output
Low Level Output Current (sinking)
Power Dissipation
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(2) Derate linearly 1.33 mW/°C above 25° C.
(3) Derate linearly 2.00 mW/°C above 25° C (OPB680, OPB680-20, OPB690Z).
(4) Derate linearly 2.50 mW/°C above 25° C (OPB685, OPB686, OPB687, OPB688, OPB695, OPB696, OPB697, OPB698).
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPB685, OPB695 Buffered 10K Pull-Up
OPB687, OPB697 Inverted 10K Pull-Up
CC
(3) (4)
CC
(2)
FAX: [phone] [e-mail] www.optekinc.com
(T
A
=25°C unless otherwise noted)
OPB685 and OPB695 Series
OPB686, OPB696 Buffered Open-Collector
OPB688, OPB698 Inverted Open-Collector
(1)
-40°C to +100°C
Issue A.2
1 second
100 mW
240 mW
Page 3 of 5
50 mA
16 mA
260°C
2.0 V
3.0 A
18 V
30 V
04/09