BMD040-3MP Bosch Sensortec, BMD040-3MP Datasheet - Page 9

• Manufacturer Part Number: BMD040-3MP
• Description: ABS. PRESSURE SENSOR ANLG INDUST
• Manufacturer: Bosch Sensortec

Specifications of BMD040-3MP

• Pressure Type: Absolute
• Operating Pressure: 7.25 ~ 435.11 PSI, 50 ~ 3000 kPa
• Port Size: Male, 0.591" (1.5mm) Tube
• Output: ANALOG
• Voltage - Supply: 4.75 V ~ 5.25 V
• Termination Style: Surface Mount
• Operating Temperature: -30°C ~ 100°C
• Package / Case: TO-8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 828-1004

Data sheet
Bosch Sensortec
BMD040
2
Installation instructions
The sensor is designed for attachment to a plane surface. The pressure nozzle might be sealed
in some applications by an O-ring and might be fixed to a PCB or something similar. The hole in
the fixture on customer side and the fastening must be designed in accordance to the offer
drawing so that a long-term, leak proof seal at the port to the measured medium are guaranteed
(if leakage is required).
The recommended installation position is pressure port inclined downwards, installation only on
clean side. Potentially freezing media and condensate are not allowed to accumulate at the
pressure port and may not be introduced on transport and assembly either.
In the interest of good continuity on the connectors, it is essential that not only the connector on
the component side is according to specification, but that the material quality and exact fit of a
cable harness connector (if such one is used) or another connector are also guaranteed. Any
connector should therefore be according to the Bosch Sensortec offer drawing specification.
When mounting the BMD040 to a printed circuit board (PCB) special care has to be taken in
order to stay below a certain temperature budget during the soldering process. For further
details on the recommended soldering conditions for the BMD040, please contact Bosch
Sensortec.
Rev. 1.3
Page 9 - proprietary information
23 October 2008
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such
as copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Specification is subject to change without notice. Document contains proprietary information and is not intended for publication.