ASDX005D44D Honeywell Sensing and Control, ASDX005D44D Datasheet

SENSOR AMP 5PSI DIFF 4V OUT

ASDX005D44D

Manufacturer Part Number
ASDX005D44D
Description
SENSOR AMP 5PSI DIFF 4V OUT
Manufacturer
Honeywell Sensing and Control
Series
ASDXr

Specifications of ASDX005D44D

Pressure Type
Differential
Operating Pressure
5 PSI
Port Size
Male, 0.09" (2.28mm) Tube, Dual
Output
0 ~ 4V
Voltage - Supply
4.75 V ~ 5.25 V
Termination Style
PCB
Operating Temperature
-20°C ~ 105°C
Package / Case
8-DIP (0.600", 15.24mm), Dual Ports, Same Side
Sensor Output
Voltage
Supply Current
6mA
External Depth
11.18mm
Voltage Rating
5.25V
Port Style
Straight
Pressure Measurement Type
Differential
Operating Pressure Range
0-5 Psi
Sensing Accuracy
2%
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
Q1361931
Microstructure Pressure Sensors
0 psi to 1 psi through 0 psi to 100 psi
FEATURES
• Available in Absolute,
• Calibrated and temperature
• Pressure ranges from
• Response time 8 ms
• Standard DIP package
• ASIC Enhanced Output
• I
• Temperature Compensated
TYPICAL APPLICATIONS
• Flow calibrators
• Ventilation and air flow
• Gas flow instrumentation
• Dialysis equipment
• Sleep apnea monitoring and
• HVAC Controls
• Barometry
• Pneumatic Controls
Sensing and Control
PERSONAL INJURY
DO NOT USE these
products as safety or
emergency stop devices or
in any other application
where failure of the product
could result in personal
injury.
Failure to comply with
these instructions could
result in death or serious
injury.
Differential and Gage types
compensated output
monitors
therapy equipment
2
C Compatible Protocol
0 psi to 1 psi through
0 psi to 100 psi
WARNING
The ASDX DO series pressure sensors are fully calibrated and temperature
compensated with on-board Application Specific Integrated Circuitry (ASIC).
This ASDX DO device is in a standard DIP package and provides digital
correction of sensor offset, sensitivity, temperature coefficients and non-
linearity. The ASDX family uses I
interfacing to most commonly used microcontrollers and microprocessors
without additional components or electronic circuitry.
The 2-wire I
output data line. The output of the device is a corrected pressure value in
hexadecimal format with 12-bit resolution. Devices are available to measure
absolute, differential, and gage pressures. The absolute devices have an
internal vacuum reference and an output proportional to absolute pressure.
Differential devices allow application of pressure to either side of the sensing
diaphragm and can be used for gage or differential measurements.
All ASDX DO devices are accurate to within ± 2.0 % full scale. The devices
are characterized for operation from a single 5 Vdc supply. The sensor is
designed and manufactured according to standards laid down in ISO 9001.
These devices are intended for use with non-corrosive, non-ionic working
fluids such as air and dry gases.
Contact your local Honeywell representative, or got to the Honeywell website
at
MISUSE OF DOCUMENTATION
Failure to comply with these instructions could result in death or
serious injury.
• The information presented in this product sheet is for reference only. Do
• Complete installation, operation, and maintenance information is
www.honeywell.com/sensing
not use this document as a product installation guide.
provided in the instructions supplied with each product.
WARNING
2
C interface has a Serial Clock Line (SCL) input and serial digital
for additional product information.
2
C compatible protocol, which allows easy
ASDX DO Series

Related parts for ASDX005D44D

ASDX005D44D Summary of contents

Page 1

... Barometry • Pneumatic Controls The 2-wire I output data line. The output of the device is a corrected pressure value in hexadecimal format with 12-bit resolution. Devices are available to measure absolute, differential, and gage pressures. The absolute devices have an internal vacuum reference and an output proportional to absolute pressure. ...

Page 2

... The output is corrected pressure as unsigned 12 bits. Slave Address is F0h. Acknowledge Bit - pull data line LOW, master generates an extra clock pulse for this purpose. Note 6: Output of the device when maximum positive pressure is applied on the backside (P2) or the front side (P1) of the sensing element. Note 7: If maximum burst pressure is exceeded, even momentarily, the package may leak or burst, or the pressure sensing die may fracture ...

Page 3

... Microstructure Pressure Sensors 0 psi to 1 psi through 0 psi to 100 psi PRESSURE RANGE SPECIFICATIONS Listing Pressure Range ASDX001 0 psi to 1.0 psi ASDX005 0 psi to 5.0 psi ASDX015 0 psi to 15 psi ASDX030 0 psi to 30 psi ASDX100 0 psi to 100 psi ORDERING INFORMATION – PART NUMBER DESCRIPTION For example: Part #ASDX015A24RDO = ASDX series, 15 psi absolute, A2 Package, 19A – ...

Page 4

... Microstructure Pressure Sensors psi through 0 to 100 psi DIMENSIONS Drawings - for reference only mm [in] D4 PACKAGE A2 PACKAGE PRESSURE TRANSDUCER PERFORMANCE CHARACTERISTICS Error Band Multiplier Over -20 °C to 105 °C [-4 °F to 221 °F] 4 Honeywell • Sensing and Control ASDX DO Series G2 PACKAGE ...

Page 5

... Microstructure Pressure Sensors 0 psi to 1 psi through 0 psi to 100 psi SERIAL INTERFACE PARAMETERS Symbol Parameter Input High Level V IH Input Low Level V IL Output Low Level V OL Pull up Current Load Capacitance SDA CL SDA SCL clock frequency f SCL Bus free time between ...

Page 6

... ORDERING INFORMATION To order, use the following part number(s) Pressure Range Differential/Gage 0 psi to 1.0 psi ASDX001D44R-DO ASDX001D44D-DO 0 psi to 5.0 psi ASDX005D44R-DO ASDX005D44D-DO 0 psi to 15 psi ASDX015D44R-DO ASDX015D44D-DO 0 psi to 30 psi ASDX030D44R-DO ASDX030D44D-DO 0 psi to 100 psi ASDX100D44R-DO ...

Related keywords