Q-D-5 Easy Braid Co., Q-D-5 Datasheet - Page 2
![BRAID DESOLDER BLUE .100" X 5'](/photos/14/45/144580/q-d-5_sml.jpg)
Q-D-5
Manufacturer Part Number
Q-D-5
Description
BRAID DESOLDER BLUE .100" X 5'
Manufacturer
Easy Braid Co.
Series
Quick Braidr
Type
Rosin, Non Activated (R)r
Specifications of Q-D-5
Width
0.100" (2.54mm)
Length
5' (1.52m)
Color
Blue
Other names
EB1026
5. FIRE FIGHTING MEASURES
6. ACCIDENTAL RELEASE MEASURES
7. HANDLING & STORAGE
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
©
8.5
5.5
5.1
5.2
5.3
5.4
6.1
6.2
6.3
6.4
7.1
7.2
8.1
8.2
8.3
8.4
1998, EASY BRAID CO., PROD-4013, Revision F 09/2009
Suitable Extinguishing Media:
Unsuitable Extinguishing Media:
Exposure Hazards:
Combustion Products:
Protective Equipment For Firefighters:
Personal Precautions:
Environmental Precautions:
Methods for Cleaning Up:
Materials not to be Used for Cleaning Up:
Handling
chemical
Recommended Storage Conditions
System Design
Control Parameters
Recommended Monitoring Procedures:
Personal Protection
CEN standards
-Resulting Gases:
-Ignition sources?
-Provision for sufficient ventilation?
-Control of dust?
-Prevention of skin contact?
-Prevention of eye contact?
-General Rules
-Technical Precautions for Safe Handling
-Measures necessary to prevent airborne levels of
-List incompatible materials
-Quantity Limits for storage
-Special Requirements for proper
storage of chemical
(e.g. Fume Hoods, Ventilated
Cabinets, Enclosure)
-Limit values or biological standards:
-Respiratory Protection:
-Hand Protection:
-Eye Protection:
-Skin Protection:
being generated as a result of handling.
Powder Dolomite, Sodium Chloride or Graphite.
Do not use water.
Copper reacts violently with C2H2, NH4N03, Bromates, Chlorates,
Iodates, C12, C1F2, Ethylene Oxide, F2, H2O2, Hydrazine monoitrate,
Hydrazoic acid, H2S, K202, NaN3, Na202, CUN03, S.
Carbon Monoxide, Aliphatic Aldehydes, and Acids
Not Needed
When subjected to temperatures over 180 o F, flux fumes should be
vented.
See Section 8.1.
Vacuum or sweep up and dispose of as a non-cumbustable metal.
Gloves not normally required. When clipping short lengths, protective
eyewear is recommended.
Vacuum or sweep up and dispose of as a noncombustible solid.
See above. See section 5, of this document.
Store in cool, dry environment for functional purposes.
None required.
If product is exposed to temperatures are above 180 0 F, use local
ventilation.
See sections 5 & 2 of this document.
General mechanical or local hood. Ventilation is recommended for
applications where the product will exceed 180 0 F.
See Section 5, of this document.
Use local or general ventilation away from the operator if the product
temperature is exposed to 180 0 F+.
Gloves may be used if resin is a skin irritant.
Eye protection should be worn when clipping short lengths.
See hand protection.
Carcinogens < 0.1%
Page 2 of 4