7590 Desco, 7590 Datasheet
7590
Manufacturer Part Number
7590
Description
STRAP GROUND ESD FOOT/SOLE 1 MEG
Manufacturer
Desco
Specifications of 7590
Strap Type
Heel Strap
Strap Closure
D-Ring
Size
One Size
Resistance (ohms)
1M
Color
Blue
Strap Material
Rubber (Heel Straps)
Lead Free Status / RoHS Status
Not applicable / Not applicable
Features
-
Number Of Conductors
-
Cord Length
-
Cord Plug
-
Cord Type
-
Strap Termination
-
Other names
16-1025
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
7590K6
Manufacturer:
EATON
Quantity:
20 000
© 2008 DESCO INDUSTRIES INC.
Employee Owned
A
D
Note:
Two heel straps are recommended for reliable grounding and ESD protection,
providing ground when one foot is off the floor.
Operator is grounded when foot is in contact with grounded dissipative or
conductive flooring.
Desco recommends the use of foot ground tester item No. 19252, 19253,
98280/98273, or 98280/98254.
For additional information on the use and maintenance of foot grounders please
ask for Technical Bulletins TB-2020, TB-2040, TB-3000.
E
F
B
LISTED
90P1
Description:
The 07590 premium series heel grounder provides effective ESD protection. The
cup is made from a black and non-marring rubber with inner tear resistant
conductive scrim. The rubber is antistatic, low tribocharging, and dissipative. It
removes charges when in contact with ESD protected floors. This foot grounder meets the less
than 3.5 x 10
megohm molded external resistor, a conductive tab with carbon suffused fibers, and a D-ring
fastening system. The product has been tested to ESD STM97.2 - Floor Materials and Footwear
Voltage Measurement in Combination with a Person. It is a suitable ESD footwear component in
Flooring - Footwear System when used as the primary grounding method (<3.5 x 10
ESD STM 97.1 Floor Materials and Footwear-Resistance Measurement in Combination with a
Person.)
Components:
A. 0.060" thick, 1.50" wide, black conductive exterior with a non-marring interior. Tear resistant
B. 3/8" wide, 30" long blue polyester tab contains electrically conductive carbon suffused fibers.
C. 3/4" wide, blue loop material with return hook tip for quick and easy adjustment and wearer's
D. 3/4" wide blue elastic material stretches for comfort.
E. D-ring fastening system.
F. A 1/4 watt, 1 megohm blue (07590) or 2 megohm black (07593) molded external resistor.
Tab to cup resistance:
10
6
nylon reinforced 4.3 oz. inner scrim layer prevents the rubber from tearing.
comfort.
- 10
Our UL listed foot grounders are rated at 250 VAC. It is not recommended to use them where exposure
to line voltages above 250 VAC is possible. Caution: The foot grounder is for ESD control. It will not
reduce or increase your risk of receiving electric shock when using or working on electrical equipment.
Meets the requirements of JEDEC-108/9, MIL-HDBK-263A, MIL-STD-1686, DOD-STD-2000.
listed for safety and date coded.
ITEM #
07590
07593
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
FOOT GROUND, HEEL, D-RING FASTENER
7
Ohms @ 100 volts
6
Foot Ground, Heel, 1 megohm resistor, RTG: 10
Foot Ground, Heel, 2 megohm resistor, RTG: 10
ohm requirement of ANSI ESD S20.20. This unit includes either a one or two
DESCRIPTION
6
6
- 10
- 10
DRAWING NUMBER
7
7
Ohms
Ohms
07590
7
Made in America
ohms per
December
DATE:
2008