7595 Desco, 7595 Datasheet
7595
Manufacturer Part Number
7595
Description
FOOT GROUND TOE LINED 2MEG
Manufacturer
Desco
Specifications of 7595
Strap Type
Heel Strap (Toe Coverage)
Strap Closure
D-Ring
Size
One Size
Resistance (ohms)
2M
Color
Black
Strap Material
Rubber (Heel Straps)
Lead Free Status / RoHS Status
Not applicable / Not applicable
Features
-
Number Of Conductors
-
Cord Length
-
Cord Plug
-
Cord Type
-
Strap Termination
-
© 2007 DESCO INDUSTRIES INC.
Employee Owned
Note:
Two heel straps are recommended for reliable grounding and ESD protection,
providing ground when one foot is off the floor.
Operator is grounded when foot is in contact with grounded dissipative or
conductive flooring.
Desco recommends the use of foot ground tester item No. 19252 or 19253.
For additional information on the use and maintenance of foot grounders please
ask for Technical Bulletins TB-2020 and TB-2040.
Item 07595 is UL listed.
D
LISTED
A
90P1
F
B
C
E
Description:
The 07595 premium toe grounder provides effective ESD protection. The
cup is made from a black and non-marring rubber with inner tear resistant
conductive scrim. The rubber is antistatic, low tribocharging, and dissipative. It removes
charges when in contact with ESD protected floors. This foot grounder meets the less
than 3.5 x 10
molded external resistor, a conductive tab with carbon suffused fibers, and a D-ring
fastening system. The product has been tested to ESD STM 97.2 - Floor Materials and
Footwear Voltage Measurement in Combination with a Person. It is a suitable ESD
footwear component in Flooring - Footwear System when used as the primary
grounding method (<3.5 x 10
Resistance Measurement in Combination with a Person.)
Components:
A. 0.060" thick, 1.50" wide, black conductive exterior with a non-marring interior. Tear
B. 3/8" wide, 30" long blue polyester tab contains electrically conductive carbon
C. 3/4" wide, blue loop material with return hook tip for quick and easy adjustment and
D. 3/4" wide blue elastic material stretches for comfort.
E. D-ring fastening system.
F. A 1/4 watt, 2 megohm black molded external resistor.
Tab to cup resistance:
10
Our UL listed foot grounders are rated at 250 VAC. It is not recommended to use them where exposure
to line voltages above 250 VAC is possible. Caution: The foot grounder is for ESD control. It will not
reduce or increase your risk of receiving electric shock when using or working on electrical equipment.
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
FOOT GROUND, TOE, CONDUCTIVE
ITEM #
07595
6
resistant nylon reinforced 4.3 oz. inner scrim layer prevents the rubber from tearing.
suffused fibers.
wearer's comfort.
listed for safety and date coded.
- 10
7
Ohms @ 100 volts
Foot Ground, Toe, 2 megohm resistor, RTG: 10
6
ohm requirement of ANSI ESD S20.20. This unit includes a two megohm
7
ohms per ESD STM 97.1 Floor Materials and Footwear-
DESCRIPTION
6
- 10
DRAWING NUMBER
7
Ohms
07595
Made in America
DATE:
8/07