7010 Desco, 7010 Datasheet - Page 4

• Manufacturer Part Number: 7010
• Description: CALIBRATION UNIT NIST STD WS&FG
• Manufacturer: Desco
• Type: Calibration Unitr

Specifications of 7010

• Features: NIST Traceable
• For Use With/related Products: 19250, 19252, 19253, 19350, 19351
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Power Supply Type: -

TB-2039 Page 4 of 4
Resistance Value
Red jack “A” - 675K:
Green jack “B” - 825K:
Green jack “C” - 80M:
Yellow jack “D” - 120M:
Step 3: Repeat the procedure testing across jacks B,
C (80M), and D (120M). The different resistance
ranges should give the display shown above. If the
tester does not meet calibration specifications, contact
factory for calibration, or ask for Technical Bulletin
TB-2040.
Figure 9. Testing 19250 for “PASS” and “FAIL” ranges
for footwear circuit as indicated on calibration unit.
Specifications
Power Source:
Resistance Ranges -
Wrist straps:
Footwear:
Calibration:
Calibration Interval:
Accuracy:
Weight:
Dimensions:
Consider adding the 07010 to your list of “test
equipment that shall be selected to make
measurements of appropriate properties of the
technical requirements that are incorporated into the
ESD program plan” as required by paragraph 6.1.3.1 of
ANSI/ESD S20.20.
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 • [phone] • Fax [phone] • Web Site: http://www.desco.com
Passive device, no power source
required
Low -
Pass -
Pass -
High -
Low -
Pass -
Pass -
High -
NIST traceable
Recommended annually
±2%
10 ounces
4.50" x 3.25" x 1.00"
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone]
Test Output - LED
Red (Low-hazard)
Green (OK-in limits)
Green (OK-in limits)
Red (High resistance)
675 Kilohm
825 Kilohm
8.5 Megohm
11.5 Megohm
675 Kilohm
825 Kilohm
80 Megohm
120 Megohm
Limited Warranty
Desco expressly warrants that for a period of one (1) year from
the date of purchase, Desco Calibration Units will be free of
defects in material (parts) and workmanship (labor). Within the
warranty period, the product will be tested, repaired, or replaced
at Desco’s option, free of charge. Call our Customer Service
Department at 909-627-8178 (Chino, CA) or 781- 821-8370
(Canton, MA) for a Return Material Authorization (RMA) and
proper shipping instructions and address. Include a copy of your
original packing slip, invoice, or other proof of purchase date. Any
unit under warranty should be shipped prepaid to the Desco
factory. Warranty repairs will take approximately two weeks.
If your unit is out of warranty, call Customer Service at 909-627-
8178 (Chino, CA) or 781-821-8370 (Canton, MA) for a Return
Material Authorization (RMA) and proper shipping instructions
and address. Desco will quote repair charges necessary to
bring your unit up to factory standards.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU
OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND
IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty will not apply to defects or
damage due to accidents, neglect, misuse, alterations, operator
error, or failure to properly maintain, clean or repair products.
Limit of Liability
In no event will Desco or any seller be responsible or liable for
any injury, loss or damage, direct or consequential, arising out of
the use of or the inability to use the product. Before using,
users shall determine the suitability of the product for their
intended use, and users assume all risk and liability whatsoever
in connection therewith.
© 2009 DESCO INDUSTRIES INC.
Employee Owned