A22-24AR Omron, A22-24AR Datasheet
![LAMP A22 SERIES 24VAC/DC LED RED](/photos/14/56/145613/a22-24ar_sml.jpg)
A22-24AR
Specifications of A22-24AR
Z1576
Related parts for A22-24AR
A22-24AR Summary of contents
Page 1
... Emergency Stop Switch A22E Install in 22-dia. or 25-dia. Panel Cutout • Direct opening mechanism to open the circuit when the contact → welds . • Safety lock mechanism prevents operating errors. • Easy mounting and removal of Switch Blocks using a lever. • Mount three Switch Units in series to improve wiring efficiency (with non-lighted Switch Units, three Units can be mounted for multiple contacts) ...
Page 2
... VAC 200 VAC lit by directly applying 110 VAC/VDC (220 VAC/VDC) to the lamp terminal. LED incorporates the 24-VAC/VDC models. 2. Equipped with 24-VAC/DC LED. (c)Copyright OMRON Corporation 2007 All Rights Reserved. A22E 5. Configuration Code Configuration None Switch only Switch with Integrated B Control Box ...
Page 3
... SPST-NC A22E-S-01 SPST-NO/SPST-NC A22E-S-11 DPST-NC A22E-S-02 DPST-NC + SPST-NO A22E-S12 TPST-NC A22E-S-03 SPST-NC A22E-M-01 SPST-NO/SPST-NC A22E-M-11 DPST-NC A22E-M-02 DPST-NC + SPST-NO A22E-M-12 TPST-NC A22E-M-03 SPST-NC A22E-L-01 SPST-NO/SPST-NC A22E-L-11 DPST-NC A22E-L-02 SPST-NC A22E-SK-01 SPST-NO/SPST-NC A22E-SK-11 DPST-NC A22E-SK-02 SPST-NC A22E-MK-01 SPST-NO/SPST-NC A22E-MK-11 DPST-NC A22E-MK-02 (c)Copyright OMRON Corporation 2007 All Rights Reserved. ...
Page 4
... VAC 200 VAC Model A22E-M-01B A22E-M-11B A22E-M-02B (c)Copyright OMRON Corporation 2007 All Rights Reserved. A22E Push-lock turn- Color of cap reset system A22EL-M-6D-01 Red A22EL-M-6A-01 A22EL-M-12A-01 A22EL-M-24A-01 A22EL-M-6D-11 A22EL-M-6A-11 A22EL-M-12A-11 A22EL-M-24A-11 A22EL-M-6D-02 A22EL-M-6A-02 A22EL-M-12A-02 A22EL-M-24A-02 A22EL-M-T1-01 A22EL-M-T2-01 A22EL-M-T1-11 A22EL-M-T2-11 A22EL-M-T1-02 A22EL-M-T2-02 4 ...
Page 5
... Lighted (wituout Voltage Reduction Unit) Operation Unit Lamp Incandescent LED Switch (withtout Voltage Reduction Unit) (c)Copyright OMRON Corporation 2007 All Rights Reserved. A22E ● Lighted (with Voltage Reduction Unit) Operation Unit Lamp LED Switch (with Voltage Reduction Unit) 5 ...
Page 6
... A22E-S Push-lock, key-reset A22E-SK (push-lock, turn-reset) Lighted Sealing capability and size Push-lock, Turn-reset A22EL-M http://www.ia.omron.com/ IP65 oil-resistant models Small (30 dia.) Medium (40 dia.) A22E-MP A22E-M A22E-MK IP65 Medium (40 dia.) (c)Copyright OMRON Corporation 2007 All Rights Reserved. A22E Large (60 dia.) A22E-LP A22E-L --- 6 ...
Page 7
... Switch Action Contacts For standard loads SPST-NO SPST-NC SPST-NO + SPST-NC A22L-11M-T1 DPST-NO DPST-NC Note: 1. The above illustrations are for the DPST-NO contact. 2. When using with a Voltage Reduction Unit, use the A22-24AR. http://www.ia.omron.com/ Model A22-6DR A22-6AR A22-12AR A22-24AR A22-24ASR Model A22-5 ...
Page 8
... A22Z-3466-2 back-ground Round A22Z-3530 Applicable dia. A22Z-3500-1 cable diameter (mm dia. A22Z-3500-2 --- A22Z-R25 --- A22Z-A30 --- A22Z-3380 One hole, yellow box A22Z-B101Y (for emergency stop) --- A22K-K Rounded shape A22Z-3360 --- A22Z-3901 --- A22Z-3905 (c)Copyright OMRON Corporation 2007 All Rights Reserved. A22E Remarks Provided as standard. Order Switch Blocks only when adding or replacing them ...
Page 9
... SEMI-S2/SEMATECH Application Guide for SEMI-S2-compatibility. The SEMI-S2- compatible Shroud and legend plate for EMERGENCY OFF come as a set. Use with an A22E Emergency Stop Switch. SEMI-S2/SEMATECH Application Guide for SEMI S2-compatible Shroud. Use together with an A22E Emergency Stop Switch. Rated current Operating voltage VDC ...
Page 10
... Malfunction within 1 ms. 3. Setting and resetting once is counted as one operation. 4. The degree of protection from the front of the panel. http://www.ia.omron.com/ Emergency Stop Switches Non-lighted model: A22E 30 operations/minute max. (See note 3.) 30 operations/minute max. (See note 3.) 100 M min. (at 500 VDC Hz, 1.5-mm double amplitude (See note 2.) ...
Page 11
... A22E-L Large Push-lock, Turn-reset (60-dia.) 60 dia. A22E-SK Small Push-lock, Key-reset (30-dia.) 30 dia. 22 http://www.ia.omron.com/ A22E-LP Large Push-pull (60-dia. ) A22E-M Medium Push-lock, Turn-reset (40-dia dia. 1.8 A22E-MK Medium Push-lock, Key-reset (40-dia dia. 1.8 (c)Copyright OMRON Corporation 2007 All Rights Reserved. A22E 60 dia ...
Page 12
... Black letters Yellow Lock Ring A22Z-3360 30 dia. Material: Iron, zinc plated http://www.ia.omron.com/ Switch dimensions when mounted to a DPST-NO (or DPST-NC) one-piece Switch Block 41.2 Note: The operation unit is an example for the A22E-M. 30-dia. Resin Attachment A22Z-A30 2.5 Tightening Wrench A22Z-3905 8 dia. ...
Page 13
... E-stop Shroud A22Z-EG1 75 63 2.8 90 dia. 78 dia. 22.2 dia. 33 dia. http://www.ia.omron.com/ Incandescent Lamp A22-5, 12, 24, H1 Two, 21 dia. Side lead draw-out hole 38 52.2 max. Note 1: The dimensions of the Shroud conform to the specifications of the SEMATECH Application Guide for SEMI S2-93. 75 min. (Determined by the ...
Page 14
... A Lock Ring is provided as a standard feature. Note: 1. When painting or coating the panel, make sure that the specified panel dimensions apply to the panel after painting or coating. 2. Use an A22Z-R25 Ring when mounting to a panel with a 25-mm diameter hole. http://www.ia.omron.com/ 105 dia. 98 dia. ...
Page 15
... Lighted with Voltage 1 X1 Reduction Unit 2 X2 Note: The above terminal connection diagrams are examples for SPST-NO + SPST-NC and DPST-NC. http://www.ia.omron.com/ Lighted Switch Blocks Lamp Socket Terminal connection (BOTTOM VIEW) DPST- (+) (− (c)Copyright OMRON Corporation 2007 All Rights Reserved. A22E ...
Page 16
... If any other materials are used, check the suitability of dimensions in advance. 2. When using pushbuttons exceeding 30 mm, adjust dimension accordingly. (When mounting the A22- matrix, “30 mm” would have to be increased to 40 mm. (4) Mounting the Switch on the Operation Unit • ...
Page 17
... Assembling the Cap Emergency Stop Switch • Insert the protrusion of the Tightening Wrench (A22Z-3905) into the Cap slot and then turn to remove the Cap. Installing/Replacing the Lamp (1) Installing/Replacing from the Panel Surface • Insert the Lamp Extractor (A22Z-3901) into the lamp, then rotate the Extractor while pressing it ...
Page 18
... Creating a Cable Port Hole Cable diameter Connector dia. A22Z-3500 dia. A22Z-3500-2 Wiring • Loosen the terminal screw from the Switch Unit until it completely comes off the groove, insert a screwdriver as shown in the following figure, then push up the washer in the direction indicated by the arrow to temporarily secure it ...
Page 19
... Particularly scratches on the Operation Unit 8 mm dia. max. may create visual and operational obtrusions. Handle the Switches with care, and do not throw or drop them. 20.2 mm max. (c)Copyright OMRON Corporation 2007 All Rights Reserved. A22E 0 /time indicates that the estimated 0.16 mA 100 mA 1 ...
Page 20
... When transferring devices and equipment, be sure to keep one copy of the Operating Manual and pack another copy with the device or equipment so the person receiving it will have no problem operating it. • Related International Standards: ISO 12100 Basic Concepts, General Principles for Design IEC 61508 Functional Safety of Electrical/Electronic/Programmable Electronic Safety-related Systems http://www.ia.omron.com/ WARNING (c)Copyright OMRON Corporation 2007 All Rights Reserved. ...
Page 21
... Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specifi ed) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS ...