8168SH9AQE2 C&K Components, 8168SH9AQE2 Datasheet - Page 10

• Manufacturer Part Number: 8168SH9AQE2
• Description: SWITCH PB SPDT PLUNGER RA PCB
• Manufacturer: C&K Components
• Type: Standardr
• Series: 8060r

Specifications of 8168SH9AQE2

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 6A @ 120VAC
• Actuator Type: Round Button
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Pole Throw Configuration: SPDT
• Switch Configuration: ON Mom
• Actuator Style: Round Plunger
• Current Rating (max): 6A
• Illumination Type: Not Required
• Ac Voltage Rating (max): 250VVAC
• Dc Voltage Rating (max): 28VVDC
• Contact Material: Coin Silver
• Contact Plating: Silver
• Housing Material: N/A/Stainless Steel
• Product Height (mm): 8.41mm
• Product Depth (mm): 28.165mm
• Product Length (mm): 12.57mm
• Operating Temp Range: -30C to 65C
• Mounting Style: Through Hole
• Terminal Type: PC Pins
• Contact Form: SPDT
• Contact Rating: 6 Amps
• Actuator: Plunger
• Supply Voltage: 120 Volts
• Terminal Seal: Epoxy
• Illumination: Not Illuminated
• Mounting Angle: Right
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: *8168SH9AQE2; 8168SH9AQE2; CKN1651

LED INFORMATION
SWITCHES WITH LED SUPPLIED: J86 OPTION:
Rectangular LEDs are supplied on 8060 Series pushbutton switches with J86 option. These LEDs are factory installed and are not replaceable.
The following specifications apply:
Process Information: Soldering to LED leads must be completed within 5 seconds at
500ºF (260ºC) maximum.
Caution: Circuit elements must limit forward current of LED to 50mA max. continuous.
* Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center.
LEDs are not supplied with J82 & J84 options. LED snaps into switch frame surrounding actuator and
is wired externally.
Fits Z3 Termination
female connector
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC
mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and
frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
Panel Inserts
OPTION
PART NO.
530100000
Available in loose pieces.
CODE
6
3
5
COLOR
Yellow
Green
Red*
INTENSITY
1.0 mcd
0.5 mcd
4.0 mcd
TYP.
Alternate Action and Momentary Pushbutton Switches
FORWARD
VOLTAGE
2.1 V
TYP.
FORWARD
CURRENT
20 mA
10 mA
20 mA
TYP.
Special colors, custom markings available, consult Customer Service Center.
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
FORWARD
AVAILABLE HARDWARE
VOLTAGE
.047" (1,19) PANEL THK.
PART NO.
432502263
MAX RATINGS AT 25ºC AMBIENT TEMPERATURE
2.5 V
FORWARD CURRENT
CONTINUOUS
50 mA
30 mA
50 mA
A-61
PANEL INSERT
WITH HOLE FOR LED
PART NO.
894902000
.062" (1,57) PANEL THK.
PART NO.
432602263
DISSIPATION
POWER
125 mW
125 mW
75 mW
BLANK PANEL INSERT
WITHOUT HOLE FOR LED
PART NO.
476602000
.090" (2,29) PANEL THK.
PART NO.
432702263
.230 DIA.
(5,84˘)
Flat denotes
cathode.
Suggested LED for J82 & J84 options.
Specifications and dimensions subject to change
Dimensions for reference only.
BLACK
.200 DIA.
(5,08˘)
www.ck-components.com
TYPICAL APPLICATION
Dimensions are shown: Inches (mm)
8060 Series
.125" (3,18) PANEL THK.
PART NO.
432802263
.030
(0,76)
.340
(8,64)
TYP. (0,63)
.025 SQ.
Third Angle
Projection
BLACK
.750
(19,05)
A