IRR3S422000 APEM Components, IRR3S422000 Datasheet - Page 56

• Manufacturer Part Number: IRR3S422000
• Description: SWITCH PB SPST-NO MOM SLDR
• Manufacturer: APEM Components
• Series: IRr
• Type: Standardr

Specifications of IRR3S422000

• Switch Function: Off-Mom
• Termination Style: Solder Lug
• Circuit: SPST-NO
• Contact Rating @ Voltage: 0.2A @ 48VDC
• Actuator Type: Round Button
• Mounting Type: Panel Mount
• Contact Rating: 200 mAmps at 48 Volts
• Actuator: Plunger, Round, Curved
• Mounting Style: Quick Connect
• Terminal Seal: Epoxy
• Contact Plating: Gold
• Contact Material: Silver
• Illumination: Not Illuminated
• Flammability Rating: UL 94 V-0
• Body Shape: Round
• Operating Force: 4 N
• Contact Configuration: SPST-NO
• Switch Operation: (On)
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 48V
• Contact Current Max: 200mA
• Actuator Style: Round-Flush
• Switch Terminals: Solder Lug
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 679-2342

56
Dimensions : First dimensions are in mm while inches are shown as bracketed numbers.
• Front panel sealing (see drawing opposite) : IP67
• Salt spray : IEC 512-6, test 11f
• Operating temperature : -20°C to +65°C
• Max. current/voltage rating with resistive load : 2A 24VDC
• Initial contact resistance : 100m1 max.
• Insulation resistance : 100 M1 min. at 500VDC
• Dielectric strength : 500 Vrms
• Electrical life at full load : 1.000.000 cycles
• Panel thickness : 7 mm (.276) max.
• Total travel : 1,5 mm (.059)
• Typical operating force : 7N
• Mechanical life : 1.000.000 cycles
• Torque : 0,5 to 1Nm max. applied to nut
IA series
Low profile pushbutton switches for harsh environments - bushing Ø 16 mm - momentary
Distinctive features - Specifications - Overview
SERIES
IA
A sealing boot is available to protect the switches against frost and sand. See end of this catalogue.
Mounting accessories : Standard hardware supplied : 1 hex nut 19 mm (.748) across flats and 1 flat seal.
Knurled nut U3327 available on request.
Packaging unit : 25 pieces
R
Actuator
round
shape
ELECTRICAL AND GENERAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
+/- 0,3 mm
+/- 2N
3 Normally
5 NC/NO
Electrical
open (NO)
combined
function
❑
❑
❑
www.apem.com
Resistant to frost, sand and hydrocarbons
Tactile feedback
Front panel sealed to IP67
F
Terminals
Flying leads
1
Contacts
Silver,
gold plated
➞
• Case/bushing : thermoplastic
• Actuator : polyurethane
• Contacts : silver, gold plated
• Multi-wire lead AWG20,
• Terminal seal : epoxy
Flat seal
section 0,6 mm
1
2
3
5
6
7/1 White
9
Acuator colours
1
Blue
Black
Green
Yellow
Red
Orange
PANEL MOUNTING
MATERIALS
2
.
00 Black
Case colour
APEM