IZPP1F462 APEM Components, IZPP1F462 Datasheet - Page 24

• Manufacturer Part Number: IZPP1F462
• Description: SWITCH PB SEALED OFF/ON IP67
• Manufacturer: APEM Components
• Series: IZr
• Type: Standardr

Specifications of IZPP1F462

• Switch Function: Off-On
• Termination Style: Wire Leads
• Circuit: SPST
• Contact Rating @ Voltage: 0.1A @ 24VDC
• Actuator Type: Round Button
• Mounting Type: Panel Mount
• Contact Rating: 100 mAmps at 24 Volts
• Actuator: Plunger, Round, Flat
• Mounting Style: Cable
• Terminal Seal: Epoxy
• Contact Plating: Gold
• Contact Material: Silver
• Illumination: Not Illuminated
• Flammability Rating: UL 94 V-0
• Body Shape: Round
• Operating Force: 5 N
• Contact Configuration: SPST
• Switch Operation: (On)
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 48V
• Contact Current Max: 200mA
• Actuator Style: Round-Flat
• Switch Terminals: Wire Leaded
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 679-2352

24
➀
• Front panel sealing : IP67 according to IEC 60529
• Shock resistance : 100 g according to IEC 512-4, test 6c
• Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray : IEC 512-6, test 11f
• Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule)
• Operating temperature : -40°C to +85°C
• Max. current/voltage rating with resistive load :
• Initial contact resistance : 100 m1 max.
• Insulation resistance : 1 G1 min. at 500VDC
• Dielectric strength : 1.500 Vrms between terminals
Flat seal
100mA 24VDC - 200.000 cycles
1.000 Vrms between terminals and frame
A resistor must be series-connected by the user.
Resistor value = supply voltage - LED forward voltage
On flying lead versions, the LED resistor can be integrated by APEM on request.
Super red (L0S)
IZ series
Rear mounted sealed pushbutton switches - bushing Ø 16 mm - metal - latching
Distinctive features and specifications
Green (L0G)
Yellow (L0Y)
1
LED colour
Blue (L0B)
IZM (adjustable hex nut)
➁
O-ring
Forward current
ENVIRONMENTAL SPECIFICATIONS
LED COMPONENT SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
LED forward current
20mA
20mA
20mA
20mA
PANEL CUT
PANEL CUT
Typ. forward voltage Max. forward voltage
❑
❑
❑
❑
❑
❑
-
-
OUT
OUT
1,95V
www.apem.com
Ø16.20
(.637DIA)
3,2V
3,2V
Rear mounting for easier installation
Latching action metal models
Fixed or variable panel thickness
Sealed to IP67
Illuminated or non-illuminated
Flat actuator for optional marking
2V
2
IZN (fixed hex nut)
1,95V
2,05V
3,70V
4V
• Panel thickness :
• Total travel : 2,5 mm (.098)
• Typical operating force : 5N
• Mechanical life : 200.000 cycles
• Torque : IZN : 1 Nm max.
• Soldering : 320°C max. for 3 sec.
• Case : thermoplastic UL94-V0
• Plunger : polyamide
• Bushing/bezel : brass, nickel
• Contacts : silver, gold plated
• Multi-wire lead AWG20,
• LED wire : AWG26,
• Lens : polycarbonate
• Terminal seal : epoxy
- IZM : 3 mm (.118) max.
- IZN : 4 mm (.157) max.
IZM : 0,7 Nm max. applied to nut
plated
section 0,6 mm
section 0,12 mm
GENERAL SPECIFICATIONS
MATRIX MOUNTING
MATERIALS
(1.063)
27.00
2
2
+/-0,3 mm
Ø16.20
(.637DIA)
+/- 2N
APEM