1241.6624.1124000 Schurter Inc, 1241.6624.1124000 Datasheet - Page 19

• Manufacturer Part Number: 1241.6624.1124000
• Description: SWITCH MSM19 RI 5A @125VAC BLUE
• Manufacturer: Schurter Inc
• Type: Vandal Resistant, Illuminatedr
• Series: MSMr

Specifications of 1241.6624.1124000

• Switch Function: On-Mom
• Termination Style: Quick Connect - .110" (2.8mm)
• Circuit: SPDT
• Contact Rating @ Voltage: 5A @ 125VAC
• Actuator Type: Flush Round Button
• Illumination Type, Color: LED, Blue
• Illumination Voltage (nominal): 24 VDC
• Mounting Type: Panel Mount
• Contact Form: SPDT
• Contact Rating: 5 Amps at 125 Volts
• Actuator: Button, Round
• Mounting Style: Panel
• Terminal Seal: Sealed
• Contact Plating: Silver
• Contact Material: Silver
• Illumination: Illuminated
• Illumination Color: Blue
• Body Length: 33.4 mm
• Body Shape: Round
• Current Rating (max): 5 Amps
• Housing Material: Stainless Steel
• Insulation Resistance: 100 MOhms
• Led Supply Voltage: 24 Volts
• Mounting Angle: Straight
• Operating Force: 4.5 N
• Voltage Rating Ac: 250 Volts
• Water / Moisture Rating: IP40
• Ip Rating: IP40
• Contact Configuration: SPST-NO
• Contact Voltage Ac Max: 250V
• Contact Current Max: 5A
• Actuator / Cap Color: Blue
• Switch Terminals: Quick Connect
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 1241.6624.1124000; 486-1191

SCHURTER GmbH
D – 79346 Endingen
www.schurter.com
4
Legend
19 of 22
4.1
4.2
Seite
During assembly, the protruding bars of the holder should not be pressed together.
I
II
III
IV
V
ASSEMBLY
General Instruction
Installation
Erstelldatum:
05.11.2004
= Housing
= Flat Pin Terminals(Illumination)
= Gasket
= Screw Nut
= Micro Switch Element
Ersteller:
Ullmer
Changes that contribute to technical improvement are subject to alternations
Änderungsdatum: Geändert von:
07.12.2010
Schillak
Installation instruction
Installation information:
1. Place the gasket accurately on the actuator
2. Tighten the screw nut with the torque
3. Clasp the micro switch into the micro switch
1. The power supply and the configuration of
2. Insulate the terminals as required
3. Installation instructions according to VDE-
housing. Then mount the actuator
housing assembly into the panel.
instructions according to
holder of the actuator housing.
the flat pin terminals has to be installed
correctly for the illumination and micro
switch function.
standard DIN VDE 0100-100 or
alternatively IEC 60354 standard
10321
Änderungs-Nr.
Datenblatt Nr.
105.9502
Print date: 10/12/2010 14:52:00
Chapter 2.5
Index
o