A22L-HW-24A-11M Omron, A22L-HW-24A-11M Datasheet - Page 28

SWITCH PB ILLUM RND MOM SPST WHT

A22L-HW-24A-11M

Manufacturer Part Number
A22L-HW-24A-11M
Description
SWITCH PB ILLUM RND MOM SPST WHT
Manufacturer
Omron
Series
A22r
Type
Illuminatedr
Datasheets

Specifications of A22L-HW-24A-11M

Circuit
DPST (1-NO, 1-NC)
Switch Function
On-Mom, Off-Mom
Contact Rating @ Voltage
10A @ 110VAC
Actuator Type
Round, Half Guard
Illumination Type, Color
LED, White
Illumination Voltage (nominal)
24 VAC/DC
Mounting Type
Panel Mount
Termination Style
Screw Terminal
Pole Throw Configuration
DPST
Switch Configuration
N.O./N.C.
Actuator Style
Round Button
Current Rating (max)
10A
Illumination Type
Led
Ac Voltage Rating (max)
440VVAC
Dc Voltage Rating (max)
380VVDC
Mechanical Life
5000000
Product Height (mm)
66.7mm
Product Depth (mm)
30mm
Operating Temp Range
-20C to 55C
Mounting Style
Panel Mount/Screw Mount
Terminal Type
Screw
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
A22LHW24A11M
Affixing Character Film
Mounting and Dismounting Snap-in Legend
• Hold the Cap, remove the cardboard on the Film, and attach the
• Press and secure the Snap-in Legend Plate onto the Legend Plate
• The direction of the characters will vary with the mounting direction
• To easily remove the Snap-in Legend Plate from the Legend Plate
Film to the Cap. Make sure that the protruding portions of the Cap
engage he cutout portions of the Film and that the characters are
aligned parallel to the imaginary line connecting the two protruding
portions to the left and right of the Cap.
Frame.
of the control panel if the Switch is a knob or key selector model.
Frame mounted to the panel, insert a Tool with a thin tip into the
space between the Snap-in Legend Plate and the Legend Plate
Frame.
Concave surface
Protruding portions on Cap
Legend Plate Frame
Snap-in Legend Plate
Remove the
cardboard.
Engraving Method
Material: Acrylic
Mounting Three-throw Spacer
Press and secure the two protruding portions of the Three-throw
Spacer to the two indented portions of the inner side of the control
panel.
• The Snap-in Legend Plate is easily removed by pressing the Snap-
• The Legend Plate Frame is made of acrylic resin, which is easily
• Engrave the characters directly on the matted side of the Snap-in
• The characters must be engraved no deeper than 0.5 mm.
• Apply alcohol-based paint coating to the engraved characters.
• If the Snap-in Legend Plate is transparent, engrave the mirror-
in Legend Plate from the back of the Legend Plate Frame.
damaged by shock. Be sure to handle the Legend Plate Frame with
care.
Legend Plate.
written characters on the back of the Snap-in Legend Plate and
apply paint coating to the characters. Then apply paint coating of a
different color to the remaining part of the Snap-in Legend Plate.
A22
28

Related parts for A22L-HW-24A-11M