LB16WKW01 NKK Switches, LB16WKW01 Datasheet - Page 2

• Manufacturer Part Number: LB16WKW01
• Description: SW PB SPDT ALT RND SILV SLD MNT
• Manufacturer: NKK Switches
• Series: LBr
• Type: Standardr

Specifications of LB16WKW01

• Circuit: SPDT
• Switch Function: On-On
• Contact Rating @ Voltage: 3A @ 125VAC
• Actuator Type: Plunger for Cap
• Mounting Type: Panel Mount
• Termination Style: Solder, Quick Connect - .110" (2.8mm)
• Contact Form: SPDT
• Contact Rating: 3 Amps at 125 Volts, 250 Volts
• Actuator: Button, Round
• Supply Voltage: 125 Volts, 250 Volts
• Mounting Style: Panel
• Terminal Seal: Epoxy
• Contact Plating: Silver
• Contact Material: Phosphor Bronze
• Illumination: Not Illuminated
• Flammability Rating: UL 94 V-0
• Body Length: 21.5 mm
• Body Shape: Round
• Dielectric Strength: 1000 Volts
• Housing Material: Polyamide, Glass Fiber Reinforced
• Insulation Resistance: 200 MOhms
• Mounting Angle: Vertical
• Operating Force: 5.39 N
• Water / Moisture Rating: IP65
• Body Style: Standard
• Current, Rating: 3 A
• Electrical Life: 100000 Operations
• Force, Operating: 5.39 N
• Ip Rating: IP65
• Material, Contact: Silver
• Material, Terminal: Phosphor Bronze
• Mechanical Life: 1000000 Operations
• Mounting Hole Size: 0.866 "
• Number Of Poles: 1
• Number Of Positions: 2
• Operation: On-On
• Resistance, Contact: 50 Milliohms
• Resistance, Insulation: 200 Megohms (Min.)
• Special Features: Illuminated
• Standards: UL Listed, File No. WOYR2.E44145, CSA Certified, File No. 023535-0-000
• Temperature, Operating: -25 to +50 °C
• Termination: Solder/Quick Connect
• Voltage, Rating: 250/30 VAC/VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: LB16WKW01-RO; LB16WKW01-RO

NKK Switches
General Specifications
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Installation
Standards & Certifications
R
Soldering Time & Temperature:
Nominal Operating Force:
Flammability Standards:
Operating Temp Range:
UL & C-UL Recognized:
Cap Installation Force:
Insulation Resistance:
Quick Connect Force:
Stationary Contacts:
Power Level (silver):
Contact Resistance:
Dielectric Strength:
Logic Level (gold):
Movable Contact:
Mounting Torque:
Switch Terminals:
Mechanical Life:
Lamp Terminals:
Contact Timing:
CSA Certified:
Electrical Life:
Inner Seal:
Vibration:
Humidity:
Housing:
Sealing:
O-ring:
Travel:
Shock:
Base:
3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
50 milliohms maximum for silver; 100 milliohms maximum for gold
200 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
1,000,000 operations minimum for momentary circuit
200,000 operations minimum for maintained circuit
100,000 operations minimum
5.39N
Nonshorting (break-before-make)
Momentary: Pretravel .059” (1.5mm); Overtravel .059” (1.5mm); Total Travel .118” (3.0mm)
Maintained: Pretravel .087” (2.2mm); Overtravel .031” (0.8mm); Total Travel .118” (3.0mm)
Glass fiber reinforced polyamide (UL94V-0)
Nitrile butadiene rubber
Silicone rubber
Silver alloy or copper with gold plating
Silver alloy or copper with gold plating
Liquid crystal polymer (UL94V-0)
Phosphor bronze with silver or gold plating
Brass with silver plating
–25°C through +50°C (–13°F through +122°F)
Note: When used with a polyvinyl chloride splash cover, the lowest limit is 0°C (32°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
IP65 of IEC60529 standard (similar to NEMA 4 & 13)
1.96Nm (17.35 lb
3.92N maximum downward force on cap
52.95N maximum downward force on connector
Manual Soldering: See Profile A in Supplement section.
UL94V-0 housing & base
All models recognized at 3A @ 125V or 250V AC or 0.4VA @ 28V AC/DC maximum;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch.
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch.
All models certified at 3A @ 125V or 250V AC or 0.4VA @ 28V AC/DC maximum;
CSA File Nos. 023535-0-000; add “/C” to end of part number to order CSA mark on switch.
Standard Size Panel Seal Pushbuttons
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
•
in) maximum
Series LB