KP0215ANAKG03RGB-1FJB NKK Switches, KP0215ANAKG03RGB-1FJB Datasheet - Page 9

• Manufacturer Part Number: KP0215ANAKG03RGB-1FJB
• Description: SW PB SPST NONTACT RED/GRN/BLU
• Manufacturer: NKK Switches
• Series: KPr
• Type: Illuminatedr

Specifications of KP0215ANAKG03RGB-1FJB

• Circuit: SPST-NO
• Switch Function: Off-Mom
• Contact Rating @ Voltage: 0.1A @ 12VDC
• Actuator Type: Square Button
• Illumination Type, Color: LED, Red/Green/Blue
• Illumination Voltage (nominal): 2.0, 3.3, 3.4 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

D
Series KP
D44
SENSITIVE DEVICES
ELECTROSTATIC
ATTENTION
cap assembly is released from the plunger, the lens and diffuser can
be separated.
the step on the diffuser.
plunger are designed with tabs and notches to assure proper
orientation of the cap on the switch.
Hold the switch tightly without touching the terminals. Firmly
press the cap onto the plunger by applying pressure from one
side to the other until both are snapped together.
Holding the switch tightly, pull the cap off the switch. Once the
Pry up the lens with fingernail or flat tip screwdriver inserted at
As shown in the accompanying illustration, the cap and
After aligning notches with tabs, join the lens and diffuser.
ASSEMBLY INSTRUCTIONS FOR SQUARE CAPS
Removal of Cap Assembly & Separation of Lens & Diffuser
Installation or Replacement of Cap
www.nkk.com
Cap Orientation
Miniature Audio/Video Pushbuttons
Notch
Tab
Step
Plunger
Notches
Cap
Assembly
Plunger
Switch