YB215CWCKW01-5D-JB NKK Switches, YB215CWCKW01-5D-JB Datasheet - Page 2

• Manufacturer Part Number: YB215CWCKW01-5D-JB
• Description: PB SW SPDT NO AMBER SOLDER LUG
• Manufacturer: NKK Switches
• Series: YB2r
• Type: Illuminatedr

Specifications of YB215CWCKW01-5D-JB

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 3A @ 125VAC
• Actuator Type: Flush Round Button
• Illumination Type, Color: LED, Amber
• Illumination Voltage (nominal): 2 VDC
• Mounting Type: Panel Mount
• Termination Style: Solder, Quick Connect - .110" (2.8mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: YB215CWCKW01/CUL-5D-JB; YB215CWCKW01/CUL-5D-JB

General Specifications
Series YB2
2
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Installation
Standards & Certifications
Soldering Time & Temperature:
Nominal Operating Force:
Flammability Standards:
Operating Temp Range:
UL & C-UL Recognized:
Insulation Resistance:
Quick Connect Force:
Stationary Contacts:
Power Level (silver):
Movable Contactor:
Contact Resistance:
Dielectric Strength:
Movable Contacts:
Logic Level (gold):
Mounting Torque:
Switch Terminals:
Lamp Terminals:
Mechanical Life:
Contact Timing:
Electrical Life:
Vibration:
Humidity:
Housing:
Sealing:
Travel:
Shock:
Bezel:
Base:
Flush Panel Seal Pushbuttons
3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
50 milliohms maximum for silver; 100 milliohms maximum for gold
200 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
1,000,000 operations minimum for momentary circuit
200,000 operations minimum for maintained circuit
100,000 operations minimum
Single pole: 1.5N
Double pole: 3.0N
Nonshorting (break-before-make)
Pretravel .059” (1.5mm); Overtravel .059” (1.5mm); Total Travel .118” (3.0mm)
Black: Glass fiber reinforced polyamide (UL94V-0); Silver: Polycarbonate (UL94V-2)
Glass fiber reinforced polyamide (UL94V-0)
Diallyl phthalate resin (UL94V-0)
Phosphor bronze with silver or gold plating
Silver alloy with silver plating or brass with gold plating
Silver alloy or copper with gold plating
Phosphor bronze with tin plating
Phosphor bronze with tin plating
–25°C through +50°C (–13°F through +122°F) for illuminated models;
–25°C through +70°C (–13°F through +158°F) for nonilluminated models
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
IP65 of IEC60529 standard
0.785Nm (6.95 lb
24.5N maximum downward force on connector
Manual Soldering: 390°C maximum for 4 minutes maximum
UL94V-0 housing & base
All solder lug models recognized at 3A @ 125/250V AC or 0.4VA @ 28V AC/DC maximum;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch;
UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch.
www.nikkaiswitches.com • Nihon Kaiheiki • Phone [phone] • Fax [phone]
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
•
in) maximum