UB225SKG03CF-1JB-RO NKK Switches, UB225SKG03CF-1JB-RO Datasheet - Page 2

• Manufacturer Part Number: UB225SKG03CF-1JB-RO
• Description: SWITCH PB ILLUM DPDT SQ PCB BCLR
• Manufacturer: NKK Switches
• Series: UB2r
• Type: Illuminatedr

Specifications of UB225SKG03CF-1JB-RO

• Circuit: DPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 0.4VA @ 28VAC/DC
• Actuator Type: Square Button
• Illumination Type, Color: LED, Red/ Green
• Illumination Voltage (nominal): 2.1, 3.5 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NKK Switches • email: [e-mail] • Phone [phone] • Fax [phone]
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Installation
Standards & Certifications
Soldering Time & Temperature:
Nominal Operating Force:
Flammability Standards:
Operating Temp Range:
Power Level (code W):
Cap Installation Force:
Insulation Resistance:
Logic Level (code G):
Stationary Contacts:
Movable Contactor:
Contact Resistance:
Dielectric Strength:
Movable Contacts:
Switch Terminals:
Lamp Terminals:
Mechanical Life:
Contact Timing:
Housing/Bezel:
Snap-in Frame:
UL Recognized:
Electrical Life:
Process Seal:
Note: See Supplement Index (page Z1) to find explanation of operating range.
Vibration:
Humidity:
Travel:
Shock:
Base:
5A @ 125/250V AC or 5A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
50 milliohms maximum for silver; 100 milliohms maximum for gold
200 megohms minimum @ 500V DC
1,000V AC minimum between contacts;
1,500V AC minimum between contacts & case
1,000,000 operations minimum for momentary &
200,000 operations minimum for alternate action
10,000 operations minimum for silver;
200,000 operations minimum for gold
Single Pole: 194 grams
Double Pole: 260 grams
Break before make
1.0mm (.039") pretravel; 1.3mm (.051") overtravel; 2.3mm (.091") total travel
Glass fiber reinforced polyamide
Stainless steel
Phosphor bronze
Silver alloy with silver plating or copper with gold plating over nickel
Silver alloy with silver plating or copper with gold plating over nickel
Phosphor bronze with silver or gold plating
Brass with silver plating for bright LED models; brass with tin-lead plating for other models
Glass fiber reinforced liquid crystal polymer
Illuminated: -25 C through +50 C (-13 F through +122 F) for Bright & Bicolor LEDs
-20 C through +50 C (-4 F through +122 F) for Super Bright LEDs
Nonilluminated: -20 C through +70 C (-4 F through +158 F)
90 ~ 95% humidity for 96 hours @ 40 C (104 F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50g acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
1.53 kg (3.37 lb)
3 seconds @ 350 C or 5 seconds @ 270 C
Not available
UL94V-0 rated base
All single & double pole models recognized at 5A @ 125/250V AC or
0.014A @ 28V DC; UL File No. E44145
GENERAL SPECIFICATIONS
Low Profile Pushbutton Switches
Series UB2
www.nkkswitches.com
8-01