PB1-3P2Y1CQE/ULCSA APEM Components, PB1-3P2Y1CQE/ULCSA Datasheet - Page 9

• Manufacturer Part Number: PB1-3P2Y1CQE/ULCSA
• Description: MINIATURE PUSHBUTTON SWITCH
• Manufacturer: APEM Components
• Series: PBr
• Type: Standardr

Specifications of PB1-3P2Y1CQE/ULCSA

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 6A @ 125VAC
• Actuator Type: Plunger
• Mounting Type: Panel Mount
• Termination Style: PC Pin
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -

C65-C73
APEM
Without keying
E
UL
CSA
QUICK-CONNECT RECEPTACLES
FRONT PANEL
Waterproof Switch Sealing Boots section in catalog.
SWITCH CAPS
B
Q
G
N
T
Cut-outs that accept all 1/4-40 threaded bushings:
PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: [phone] FAX: [phone] E-mail: [e-mail]
For power circuits - coin silver
RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor).
Underwriter Laboratories file no. E66367. Note - applicable only to terminations with coin silver contacts
(Q or G options).
For power circuits - coin silver
RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor).
Canadian Standards Association file no. LR54592-1. Note - applicable only to terminations with coin silver contacts
(Q or G options) as CSA recognizes switches for power applications only.
Dry circuit - gold over nickel over brass.
RATING: 0.4 Volt-Amps (VA) max. at 20 V max.
ELECTRIC LIFE: 60,000 cycles minimum. MECHANICAL LIFE: 500,000 cycles minimum.
Power circuit - coin silver.
RATING: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC (resistive loads).
ELECTRIC LIFE: 60,000 cycles minimum at full load.
Dry circuit or power circuit - gold over nickel over coin silver.
RATINGS & ELECTRIC LIFE: Same as B & Q above - i.e. - can be used in either dry circuit or power circuit, however once used in power circuit,
switch cannot be re-used in dry circuit. This option satisfies those customers who have both dry circuit and power circuit requirements, but prefer
to inventory only one switch for both.
Dry circuit - gold over nickel over brass. Note- less gold than B option.
RATING: 0.4 Volt-Amps (VA) max. at 20 V max.
ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute.
Power circuit - Silver plate over brass.
RATING: 1 Amp at 125 VAC or 0.5 Amps at 250 VAC (resistive loads).
ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute.
Space between terminals
and case hole is completely
epoxy sealed to prevent
flux and contaminant entry.
for switches without bezels also available - see Hardware section of catalog
SEAL: Silicone rubber boots for front panel sealing of the switch against high pressure water or other contaminants are available. See
EPOXY SEALING OPTION
With A107 anti-rotate With A158 anti-rotate With D bushing
ring
73
that are compatible with solder lug or p.c. terminals are commercially available. Consult factory.
ring
CONTACT MATERIAL OPTIONS
UL & CSA OPTIONS
PANEL CUT-OUTS
MISCELLANEOUS
/R
9/10/00, 3:29 PM
REVERSE ACTION OPTION
To reverse the NO and NC
terminals, add /R to the switch
model number.
With slotted keyway
bushings
Solder dipped terminals and custom
contact plating available - contact factory.
Accepts all 1/4" non-
threaded bushings
C73
C