7201J11CQE22 C&K Components, 7201J11CQE22 Datasheet - Page 54

• Manufacturer Part Number: 7201J11CQE22
• Description: SWITCH ROCKER DPDT W/FRAME PCB
• Manufacturer: C&K Components
• Series: 7000r

Specifications of 7201J11CQE22

• Circuit: DPDT
• Switch Function: On-On
• Contact Rating @ Voltage: 5A @ 120VAC
• Illumination: Non-Illuminated
• Mounting Type: Panel Mount, Snap-In
• Termination Style: PC Pin
• Panel Cutout Dimensions: 19.05mm x 10.41mm
• Pole Throw Configuration: DPDT
• Switch Configuration: ON None ON
• Actuator Style: Rocker
• Actuator Material: Nylon
• Current Rating (max): 5A
• Illumination Type: Not Required
• Ac Voltage Rating (max): 250VVAC
• Dc Voltage Rating (max): 28VVDC
• Contact Material: Coin Silver
• Contact Plating: Silver
• Housing Material: N/A/Stainless Steel
• Product Depth (mm): 15.39mm
• Product Length (mm): 24mm
• Operating Temp Range: -30C to 85C
• Terminal Type: PC Pins
• Contact Form: DPDT
• Contact Rating: 0.4 Volt-Amp
• Actuator: Rocker with Frame
• Color: Black
• Mounting Style: PCB
• Terminal Seal: Epoxy
• Voltage Rating Ac: 250 Volts
• Voltage Rating Dc: 28 Volts
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: *7201J11CQE22; CKN9718

Not available with 9221 model or Z4 terminations.
9201 Only
NOTE: Terminal bend radii and lead-in manufacturing option.
Terminal spacing greater than 3mm at all points.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
AV2
E
1 END CONTACTS: Coin silver, silver plated.
2 CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated.
3 END CONTACTS: Silver cadmium oxide.
4 CENTER CONTACTS: Copper alloy, silver plated.
5 Z4 TERMINALS ONLY: Copper alloy, tin plated.
6 Cadmium used for electrical contacts is acceptable for RoHS.
EPOXY SEAL
VERTICAL RIGHT ANGLE, PC THRU-HOLE
OPTION
CODE
Q
MODEL
9201
9221
SILVER CADMIUM OXIDE 3,4,0
CONTACT MATERIAL
MATERIAL
CONTACT
SILVER 1,2
TERMINATIONS
SEAL
Power Rocker and Lever Handle Switches
SILVER OR TIN 2,5
TERMINAL
NOTE: Any models supplied with Q contact material is RoHS compliant.
9221 model must be ordered with Z4 terminations and D seal option.
All 9000 Series models meet international dimensional and electrical requirements.
PLATING
TIN 5
G–55
Must be ordered with 9221 model and Z4 termination.
D
POWER
NO EPOXY SEAL
6 AMPS @120 V AC OR 28 V DC; 3 AMPS @ 250 V AC.
10 AMPS @125 V AC OR 28 V DC; 5 AMPS @ 250 V AC.
Terminal Nos. Molded
On Side of Case
RATINGS
Specifications and dimensions subject to change
www.ck-components.com
Vertical Actuation
Dimensions are shown: Inches (mm)
9201J1AV2QE2
9000 Series
DPDT
G