SS12SDP2 NKK Switches, SS12SDP2 Datasheet - Page 2
![SW SLIDE ULTRA MINI SPDT TOP ACT](/photos/15/20/152011/ss12sdp2_sml.jpg)
SS12SDP2
Manufacturer Part Number
SS12SDP2
Description
SW SLIDE ULTRA MINI SPDT TOP ACT
Manufacturer
NKK Switches
Series
SSr
Type
Slider
Specifications of SS12SDP2
Circuit
SPDT
Switch Function
On-On
Contact Rating @ Voltage
0.1A @ 30VDC
Actuator Type
Standard
Mounting Type
Through Hole
Orientation
Vertical
Termination Style
PC Pin
Contact Form
SPDT
Contact Rating
0.1 Amp at 30 Volts
Mounting Style
Through Hole
Illumination
Not Illuminated
Travel
2 mm
Body Style
Ultra-Miniature
Brand/series
SS Series
Current, Rating
0.1 A
Dielectric Strength
500 VAC
Dimension, Actuator
0.047 in. L x 0.079 in. H
Dimension, Body
0.402 in. L x 0.177 in. W x 0.257 in. H
Electrical Life
10000 Operations (Min.)
Material, Body
Polyacetal Case, Polyamide Actuator
Material, Contact
Silver
Mechanical Life
10000 Operations (Min.)
Mounting Hole Size
0.031 "
Number Of Poles
1
Number Of Positions
2
Operation
On-None-On
Resistance, Contact
20 Milliohms (Max.)
Resistance, Insulation
100 Megohms (Min.) @ 500 VDC
Temperature, Operating, Maximum
60 °C
Temperature, Operating, Minimum
-15 °C
Termination
Solder
Voltage, Rating
30 VDC
Contact Configuration
SPDT
Actuator Style
Raised
Switch Operation
On-On
Contact Voltage Dc Max
30V
Contact Current Max
100mA
Switch Mounting
PCB
Svhc
No SVHC (15-Dec-2010)
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
360-2133
General Specifications
NKK Switches
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
PCB Processing
Standards & Certifications
Operating Temp Range:
Power Level (code 2):
Insulation Resistance:
Logic Level (code 4):
Movable Contactor:
Contact Resistance:
Dielectric Strength:
CSA Certification:
UL Recognition or
Mechanical Life:
Contact Timing:
Electrical Life:
Interior Base:
Upper Case:
Lower Case:
Total Travel:
Soldering:
Terminals:
Vibration:
Humidity:
Cleaning:
Actuator:
Shock:
0.1A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
20 milliohms maximum for power level; 40 milliohms maximum for logic level
100 megohms minimum @ 500V DC
500V AC minimum 1 minute minimum
10,000 operations minimum
10,000 operations minimum
Shorting (make-before-break)
.079” (2.0mm)
Polyamide
Polyester for 3-On models; polyacetal for all other models
Glass fiber reinforced polyester for 3-On models;
glass fiber reinforced polybutylene terephthalate (thermoplastic) for other models
Phosphor bronze with silver plating (code 2) or
phosphor bronze with gold plating (code 4)
Phenolic resin (thermoset)
Brass with silver plating over copper plating or brass with gold plating
–15°C through +60°C (+5°F through +140°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
Wave Soldering: See Profile B in Supplement section.
Manual Solder: See Profile B in Supplement section.
Hand clean locally using alcohol based solution.
The SS series devices have not been tested for UL recognition and CSA certification.
These switches are designed for se in a low-voltage, low-current circuit.
When used as intended in a low-voltage, low-current circuit, the results do not produce
hazardous energy.
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Ultra-Miniature Slides
Series SS