GS02MSV1KE(T&R) C&K Components, GS02MSV1KE(T&R) Datasheet - Page 3

• Manufacturer Part Number: GS02MSV1KE(T&R)
• Description: SWITCH SLIDE SPST SMD .4VA
• Manufacturer: C&K Components
• Series: GSr

Specifications of GS02MSV1KE(T&R)

• Circuit: SPST
• Switch Function: On-Off
• Contact Rating @ Voltage: 0.4VA @ 20VAC/DC
• Actuator Type: Standard
• Mounting Type: Surface Mount
• Orientation: Vertical
• Termination Style: Gull Wing
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: CKN9024TR; GS02MSV1KE; GS02MSV1KETR; GS02MSV1KETR

CAUTION: PC mounting layouts and pads as shown are designed to be compatible with the latest equipment and reflow techniques. Care should be taken in the design and location of PC lands
to suit individual needs. Orientation relative to reflow direction may significantly impact solder joint integrity.
HOW TO ORDER
Complete part numbers for GS SERIES ULTRA-MINIATURE SURFACE MOUNT SLIDE SWITCHES are shown on pages E-11
and E-12. Switches available on embossed anti-static tape and reels per EIA 481-3, consult factory. GS Series thru-hole models
also available, see pages E-9 and E-10.
SPECIFICATIONS
CONTACT RATING: 0.4 VA max. @ 20 V AC or DC max.
MECHANICAL & ELECTRICAL LIFE: 40,000 make-and-break
CONTACT RESISTANCE: Below 50 milliohms typ. initial @
INSULATION RESISTANCE: 10
DIELECTRIC STRENGTH: 500 V RMS min. @ sea level.
OPERATING TEMPERATURE: – 30
SOLDERABILITY: Per MIL-STD-202F method 208D, or
PACKAGING: Some models available on embossed anti-static tape
NOTE: Specifications and materials listed above are general specifications for switches with standard options. For information on specific and custom switches, consult factory.
cycles at full load.
2– 4 V DC, 100 mA.
EIA RS-186E method 9 (1 hour steam aging).
and reels per EIA 481-3. Tape and cover strip are conductive
for use near statically sensitive components, consult factory.
COMPONENTS, INC. 57 Stanley Avenue, Watertown, MA 02172
GS02 - omit pad 2.
SC1 Terminal Style
SA Terminal Style
GS Series
9
ohms min.
_
C to 85
_
C.
GS02 - omit pad 2.
SA1 Terminal Style
SV1 Terminal Style
PC MOUNTING
GS02 Models
MATERIALS
HOUSING AND BASE: Glass filled nylon 4/6, flame retardant,
ACTUATOR: Polyetherimide PEI (UL 94V-0), with standard
SWITCH SUPPORT: Brass, tin plated.
MOVEABLE CONTACTS: Beryllium copper, with gold plate over
STATIONARY CONTACTS: Copper alloy, with gold plate over
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
TERMINAL SEAL: Epoxy. All terminals insert molded.
Surface Mount Slide Switches
heat stabilized (UL 94V-0).
internal seal.
nickel plate.
nickel plate.
Tel: [phone]
Fax: [phone]
Ultra-Miniature
SV1 Terminal Style
SC Terminal Style
GS01 Models
Sales: [phone]
E-13
E