SS-5GL2 Omron, SS-5GL2 Datasheet - Page 6

• Manufacturer Part Number: SS-5GL2
• Description: BASIC SWITCH SPDT 5A ROLL LEVER
• Manufacturer: Omron
• Series: SSr
• Type: Snap Actionr

Specifications of SS-5GL2

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 5A @ 125VAC
• Actuator Type: Lever, Roller
• Mounting Type: Chassis Mount
• Termination Style: Solder Lug
• Operating Force: 50gf
• Contact Form: SPDT
• Contact Rating: 5 Amps at 125 Volts, 4 Amps at 30 Volts
• Actuator: Lever, Hinge Roller
• Ingress Protection: IP67, Watertight
• Microswitch Type: Subminiature
• Actuator Style: Hinge Roller Lever
• Operating Force Max: 50gf
• Contact Voltage Ac Nom: 250V
• Contact Current Max: 5A
• Switch Terminals: Solder Lug
• Circuitry: SPDT
• Body Style: Subminiature
• Current, Rating: 5/4 AAC/ADC
• Dielectric Strength: 1500 VAC
• Force, Operating: 50 g
• Mounting Hole Size: 2.4 mm
• Number Of Poles: 1
• Operation: Snap Action
• Standards: UL Recognized, CSA Certified
• Temperature Rating: -25 to +85 °C
• Termination: Solder
• Voltage, Rating: 125/30 VAC/VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: SS5GL2; SW156

Standard type general purpose
Note: 1. The above current ratings are the values of the steady-state current.
■ Contact Resistance
■ Contact Form
Sealed lead wire terminal models
have color coded leads.
* Consult Omron for SPST-NC and SPST-NO contact form types ordering information.
■ Approvals
UL (File No. E41515), CSA (File No. LR21642), SS-5/SS-10: EN conforms 61058-1
VDE (File No. 5861-3221)
SEMKO (File Nos. 43-8614026/43-891609)
Note: The rated values approved by each of the safety standards (e.g. UL, CSA) may be different from the performance characteristics individually
4
Switch series:
Contact form
125 VAC
250 VAC
8 VDC
14 VDC
30 VDC
125 VDC
250 VDC
Inrush current
Contact rating:
Normal operating force models (SS-@)
Low operating force models (SS-@-F)
Super-low operating force models (SS-@-E)
Lead wire models (all OF types)
SPDT
(common throughout the series)
Type
SS-10 series
SS-5 series
SS-01 series
Type
SS-5 series
Type
SS-10 series
SS-5 series
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 milliseconds max. (DC). The inductive load applicable to the
3. Lamp load has an inrush current of 10 times the steady-state current
4. Motor load has an inrush current of 6 times the steady-state current.
5. If the switch is used in a DC circuit and is subjected to inrush current or surge, connect a surge suppressor across the switch.
defined in this catalog.
SS-10 series must have a power factor of 0.75 min.
Snap Action Switch
Rivet contacts
Resistive load
SS-5
NC
5 A
3 A
5 A
5 A
4 A
0.4 A
0.2 A
20 A max. 10 A max. 20 A max. 15 A max. (both non-inductive and inductive loads)
NO
5 A
3 A
5 A
5 A
4 A
0.4 A
0.2 A
SS
(m
SS-10
10.1 A
10.1 A
10.1 A
10.1 A
4 A
0.4 A
0.2 A
NC
SPST-NC*
(standard models rated at 0.1 to 0.5 A)
Ω
General-purpose type
General-purpose type
Super-low force type
General-purpose type
General-purpose type
General-purpose type
max., initial)
NO
10.1 A
10.1 A
10.1 A
10.1 A
4 A
0.4 A
0.2 A
SS-01@
0.1 A
50 mΩ
100 mΩ
150 mΩ
100 mΩ
Lamp load
SS-5 and SS-10
NC
1.5 A
1 A
2 A
2 A
2 A
0.05 A
0.03 A
NO
0.7 A
0.5 A
2 A
2 A
2 A
0.05 A
0.03 A
SS-5@
3 A or 5 A
30 mΩ
50 mΩ
—
50 mΩ
Inductive load
SS-5 and SS-10
NC
3 A
2 A
5 A
4 A
3 A
0.4 A
0.2 A
SPST-NO*
(standard models rated at 0.1 to 5 A)
Rating
10.1 A, 250 VAC
5 A, 125 V, 3 A 250 VAC
0.1 A, 125 VAC, 30 VDC
Rating
5 A, 250 VAC
Rating
10 A, 250 VAC
5 A, 250 VAC
NO
3 A
2 A
4 A
4 A
3 A
0.4 A
0.2 A
SS-10@
10.1 A
30 mΩ
—
—
—
Motor load
SS-5 and SS-10
NC
2.5 A
1.5 A
3 A
3 A
3 A
0.05 A
0.03 A
NO
1.3 A
0.8 A
3 A
3 A
3 A
0.05 A
0.03 A