SS-5GL2 Omron, SS-5GL2 Datasheet - Page 3

• Manufacturer Part Number: SS-5GL2
• Description: BASIC SWITCH SPDT 5A ROLL LEVER
• Manufacturer: Omron
• Series: SSr
• Type: Snap Actionr

Specifications of SS-5GL2

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 5A @ 125VAC
• Actuator Type: Lever, Roller
• Mounting Type: Chassis Mount
• Termination Style: Solder Lug
• Operating Force: 50gf
• Contact Form: SPDT
• Contact Rating: 5 Amps at 125 Volts, 4 Amps at 30 Volts
• Actuator: Lever, Hinge Roller
• Ingress Protection: IP67, Watertight
• Microswitch Type: Subminiature
• Actuator Style: Hinge Roller Lever
• Operating Force Max: 50gf
• Contact Voltage Ac Nom: 250V
• Contact Current Max: 5A
• Switch Terminals: Solder Lug
• Circuitry: SPDT
• Body Style: Subminiature
• Current, Rating: 5/4 AAC/ADC
• Dielectric Strength: 1500 VAC
• Force, Operating: 50 g
• Mounting Hole Size: 2.4 mm
• Number Of Poles: 1
• Operation: Snap Action
• Standards: UL Recognized, CSA Certified
• Temperature Rating: -25 to +85 °C
• Termination: Solder
• Voltage, Rating: 125/30 VAC/VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: SS5GL2; SW156

■ Ratings
Note: 1. Data in parentheses apply to the SS-10 models only.
■ Approved Standards
UL Recognized (File No. E41515)
CSA Certified (File No. LR21642)
EN61058-1 - - VDE approval
(File No. 129246 for SS-5, 125256 for SS-10)
EN61058-1 - - TÜV Rheinland approval
(File No. J9451450)
Testing conditions: 5E4 (50,000 operations), T85 (0°C to 85°C)
Note: The rated values approved by each of the safety standards
Contact form
125 VAC
250 VAC
8 VDC
14 VDC
30 VDC
125 VDC
250 VDC
Rated Voltage
125 VAC
250 VAC
30 VDC
Rated Voltage
250 VAC
Rated Voltage
250 VAC
Switch series:
2. The above current ratings are the values of the steady-state current.
3. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC). The inductive load rating of the SS-10 is the
4. Lamp load has an inrush current of 10 times the steady-state current
5. Motor load has an inrush current of 6 times the steady-state current.
6. If the switch is used in a DC circuit and is subjected to inrush current or surge, connect a surge suppressor across the switch.
7. The electrical rating applies under the following test conditions:
(e.g. UL, CSA) may be different from the performance charac-
teristics individually defined in this catalog.
same as that of SS-5.
Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/minute
(reference values)
10.1 A
SS-10
- - -
- - -
NC
Resistive load
5 A (10.1A)
3 A (10.1A)
5 A (10.1A)
5 A (10.1A)
10.1 A
10.1 A
SS-10
SS-10
0.4 A
0.2 A
4 A
NO
SS-5
- - -
5 A
3 A
SS-5
SS-5
1.5 A
5 A
5 A
NC
1 A
Lamp load
0.05 A
0.03 A
2 A
2 A
2 A
SS-01
0.1 A
0.1 A
- - -
0.7 A
0.5 A
SS-10 and SS-5
NO
NC
5 A
Inductive load
■ Contact Specifications
Note: Minimum applicable loads are indicated by N standard refer-
Specification
Material
Gap (standard value)
Inrush current
Minimum applicable
load (see note)
0.4 A
0.2 A
3 A
2 A
4 A
3 A
ence values. This value represents the failure rate at a 60%
(λ
The equation
rate of 1/2,000,000 operations can be expected at a reliability
level of 60%
60
Item
) reliability level (JIS C5003).
NO
4 A
λ
60
Snap Action Switch
2.5 A
1.5 A
NC
=0.5 x 10
NC: 20A max.
NO: 15A max.
Motor load
Silver alloy
0.05 A
0.03 A
SS-10
3 A
3 A
3 A
160 mA at 5 VDC
-6
1.3 A
0.8 A
/ operations indicates that a failure
0.5 mm
NO
Rivet
NC: 20A max.
NO: 10A max.
Silver
SS-5
Resistive Load
NC
SS
SS-01
0.1 A
0.1 A
0.1 A
0.1 A
- - -
- - -
- - -
1 mA at 5 VDC
Gold alloy
Crossbar
0.25 mm
1A max.
SS-01
NO
97