D3D-221 Omron, D3D-221 Datasheet - Page 3

• Manufacturer Part Number: D3D-221
• Description: SWITCH MINI SPST-NC DOOR LEVER
• Manufacturer: Omron
• Series: D3Dr
• Type: Miniature Door Switchr

Specifications of D3D-221

• Circuit: SPST-NC
• Switch Function: On-Mom
• Contact Rating @ Voltage: 1A @ 125VAC
• Actuator Type: Angled Toggle (Detector)
• Mounting Type: Panel Mount, Snap-In
• Termination Style: Connector
• Operating Force: 204gf
• Contact Form: SPST - NC
• Contact Rating: 1 Amp at 125 Volts, 0.5 Amp at 250 Volts
• Actuator: Lever
• Microswitch Type: Miniature
• Actuator Style: Leaf Lever
• Operating Force Max: 204gf
• Contact Voltage Ac Nom: 250V
• Contact Current Max: 1A
• Switch Terminals: Connector
• Circuitry: SPST-NC
• Body Style: Miniature
• Current, Rating: 1/0.5 A
• Dielectric Strength: 1500 VAC
• Ip Rating: IP00
• Mounting Hole Size: 22.9x11.2 mm
• Number Of Poles: 1
• Operation: Snap Action
• Standards: UL 1054 (File No. E41515), CSA C22.2 No. 55, cuRus component recognized
• Temperature Rating: -30 to 60 °C
• Termination: Crimp
• Voltage, Rating: 125/250 VAC
• Rating: 1 A @ 125 VAC; 0.5 A @ 250 VAC
• Operating Speed: 7.5 to 500 mm/s
• Operating Temperature: –30°C to 60°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: D3D221; SW749

D3D
Dimensions
■
Note:
■
Note
Plunger Models
D3D-111
D3D-121
D3D-131
Lever Models
D3D-211
D3D-221
D3D-231
Dimensions and Operating Characteristics
Mounting Panel Cutout Dimensions
1. All units are in millimeters unless otherwise indicated.
2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
3. The operating characteristics are for operation in direction A (indicated by the arrow).
All units are in millimeters unless otherwise indicated.
R
R1 MAX.
Switch insertion
8.1 dia.
10
11
6
6 dia.
10
11
22.9
direction
− 0.1
R3
0
t = 0.8 to 1.5 mm
15.7±
15
Note: The dimensions OP1 and OP2 apply to the D3D-211
15.75±
5.5
0.5
15
Note: The dimensions OP1 and OP2 apply to the D3D-111
11.2 +
3
only. The D3D-221 and D3D-231 are SPST-NC and
SPST-NO respectively and so therefore have only one
corresponding dimension here (OP).
6.5
0.2
2
2
0.1
t
only. The D3D-121 and D3D-131 are SPST-NC and
SPST-NO respectively and so therefore have only
one corresponding dimension here (OP).
0
(90°)
2
A
A
25
25
9±
13.5
R1
R0.5
0.5
11.4
1.5
note.)
(See
OP2
11.4
1.5
OP2
(See
note.)
note.)
OP1
(See
OP1
(See
note.)
■
The terminals connect to JST’s HL Connector.
The HL Connector consists of the following components.
Contact: SSF-21T-P1.4
Housing: HLP-03V
OMRON does not sell the HL Connector. Contact the following.
J.S.T. Manufacturing Co., Ltd. (Japan)
J.S.T. (U.K.) Ltd. (United Kingdom)
J.S.T. Corporation (U.S.A.)
J.S.T. (H.K.) Co. Ltd. (Hong Kong)
Connectors
15
15
Phone: [phone]
Fax: [phone]
Phone: [phone]
Fax: [phone]
Phone: [phone]
Fax: [phone]
Phone: [phone]
Fax: [phone]
OF max.
TTF max.
TT
OP min.
OF max.
TTF max.
TT
OP min.
Model D3D-211
Model D3D-111 D3D-121 D3D-131
Type
Type
(NC-OFF)
(NO-ON)
11.5 mm
(NC-OFF)
(NO-ON)
13 mm
13 mm
12 mm
OP1
OP2
9.7 mm (reference value)
OP1
OP2
9.0 mm (reference value)
Plunger model
2.0 N {204 gf}
2.5 N {245 gf}
Lever model
2.0 N {204 gf}
3.5 N {357 gf}
D3D-221 D3D-231
13 mm
13 mm
11.5 mm
12 mm
D3D
3