A7AS-207-PM-1 Omron, A7AS-207-PM-1 Datasheet
A7AS-207-PM-1
Specifications of A7AS-207-PM-1
Related parts for A7AS-207-PM-1
A7AS-207-PM-1 Summary of contents
Page 1
... Model Number Structure ■ Model Number Legend A7AS-@@@-@ Mounting Method 2: Snap-in (front mounting) 2. Output Code Number 03: Decimal code output 06: Binary coded decimal output 07: 06 with component-adding provision 19: 03 with component-adding provision 3. Unit Color None: Light gray 1: Black (See note 2.) A7AS Thumbwheel Switch 51 ...
Page 2
... Models with stoppers are also available. Add “-S@@” after the “103,” “106,” “107,” “119,” “203,” “206,” “207,” or “219” in the model number and specify the display range in the @@. For example, to specify the range add “-S06” to the model number (e.g., A7AS-203-S06-1). ...
Page 3
... M Ω min. (at 500 VDC) 600 VAC, 50/60 Hz for 1 min 1,000 VAC, 50/60 Hz for 1 min Hz, 1.5-mm double amplitude 2 490 m/s min. 1,000,000 operations min. 50,000 operations min. Operating: –40 ° ° C –40 ° ° C Storage: Operating: 45% to 85% 3.92 N max. A7AS A7AS Thumbwheel Switch 53 ...
Page 4
... Output Codes/Terminals How to Read Output Codes Example for A7AS with Output Code 06 For example, when the dial position is “3,” the common terminal C on the Switch is connected to terminals 1 and 2. When the Switch is inserted into the Connector, the common terminal C becomes connector terminal 3, and terminals 1 and 2 become connector terminals 5 and 7 respectively. ...
Page 5
... Component-adding provision Number (8n + 11) ( Switches ( Note: 1. The dimensions above include both End Caps, and will increase 8 mm for each additional Switch inserted. 2. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. The tolerance for multiple connection is ± (number of units x 0.4) mm. A7AS 55 ...
Page 6
... End Caps for Push-operated Switches A7AS-M(-1) Snap-in Panel Mounting Left Side Right Side Spacers for Thumbwheel Switches SRT-P@ Screw Panel Mounting Note: The @ in the Spacer model number stands for a letter in the range (Refer to the table under the explanation about Spacers on page 52.) ...
Page 7
... Two, 3.3 dia. Screw-mounting Models Tighten mounting screws to a torque between 0.39 to 0.59 N·m, using M3 screws. Use plain washers or spring washers together with the screws. Soldering Refer to Precautions for Correct Use on page 4. NRT-CP (PCB terminals) A7AS 1×2 elliptical hole A7AS Thumbwheel Switch 57 ...