G3T12AH-R NKK Switches, G3T12AH-R Datasheet - Page 2

• Manufacturer Part Number: G3T12AH-R
• Description: SWITCH TOGGLE SPDT .4VA RA SMD
• Manufacturer: NKK Switches
• Series: G3Tr

Specifications of G3T12AH-R

• Circuit: SPDT
• Switch Function: On-On
• Contact Rating @ Voltage: 0.4VA @ 28VAC/DC
• Actuator Type: Standard Round
• Actuator Length: 3.81mm
• Illumination: Non-Illuminated
• Mounting Type: Surface Mount
• Termination Style: Gull Wing
• Bushing Thread: Unthreaded
• Pole Throw Configuration: SPDT
• Switch Configuration: ON None ON
• Actuator Style: Toggle
• Current Rating (max): 0.1A
• Ac Voltage Rating (max): 28VVAC
• Dc Voltage Rating (max): 28VVDC
• Contact Material: Phosphor Bronze
• Contact Plating: Gold
• Housing Material: Polyphenylene Sulfide/Resin
• Mechanical Life: 50000
• Product Height (mm): 5.55mm
• Product Depth (mm): 13.35mm
• Operating Temperature Min Deg. C: -30C
• Product Length (mm): 11mm
• Operating Temperature Max Deg. C: 85C
• Mounting Style: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 360-1024-2; 360-1024-2; 360-1773-2; G3T12AH-R-RO

Series G3T
Process Sealed Ultra-Miniature SMT Toggles
A
Distinctive
Characteristics
Ultra-miniature size allows high density mounting, and extremely light
weight of 0.6 gram makes these switches ideal for handheld equipment.
Tape-reel and stick-tube packaging allow rapid automated
placement of surface mount devices. Tape-reel packaging
meets EIA-481-2 Standard.
Heat resistant resin used for housing, base, and
lever allows vapor phase and infrared convection
reflow soldering.
Combination of design features achieves total seal and
allows automated processing techniques, including flux
cleaning procedures: one-piece bushing and housing,
rubber seals surrounding actuator and base, epoxy at
joint of case and base, and molded-in, epoxy-sealed
terminals.
Award-winning STC contact mechanism with benefits
unavailable in conventional mechanisms: smoother, positive
detent actuation, increased contact stability and unparalleled logic-level
reliability. (Additional STC details in Terms & Acronyms; see Supplement section.)
Gull-wing terminals provide mechanical stability during soldering and simplified solder
joint inspection.
Coplanarity: all considered surfaces must lie between two parallel planes that are a
maximum distance apart of .0059” (0.15mm). (Additional coplanarity details in Terms
and Acronyms in the Supplement section.)
Actual Size
www.nkk.com
A43