M2018ES1W01 NKK Switches, M2018ES1W01 Datasheet - Page 2
![SWITCH TOGGLE SPDT MOM 6A 5PCS](/photos/15/42/154288/m2012es1w01__m2013es1w01__m2015es1w01_m2018es1w01__m2019es1w01_sml.jpg)
M2018ES1W01
Manufacturer Part Number
M2018ES1W01
Description
SWITCH TOGGLE SPDT MOM 6A 5PCS
Manufacturer
NKK Switches
Series
Mr
Type
Toggler
Specifications of M2018ES1W01
Circuit
SPDT
Switch Function
Mom-Off-Mom
Contact Rating @ Voltage
6A @ 125VAC
Actuator Type
Flatted
Actuator Length
11.40mm
Illumination
Non-Illuminated
Mounting Type
Panel Mount
Termination Style
Solder Lug
Bushing Thread
1/4-40
Contact Form
SPDT
Contact Current Rating
6 Amps at 125 Volts
Mounting Style
Panel
Terminal Seal
Epoxy
Contact Plating
Silver
Actuator
Lever, Flat
Voltage Rating Ac
125 Volts
Contact Rating
6 Amps at 125 Volts
Body Style
Miniature
Current, Rating
6/3 AAC/ADC
Dielectric Strength
1500 VAC
Mounting Hole Size
0.256 "
Number Of Poles
1
Number Of Positions
3
Operation
(On)-Off-(On)
Termination
Solder
Voltage, Rating
250/30 VAC/VDC
Pole Throw Configuration
SPDT
Switch Configuration
ON OFF ON
Actuator Style
Small Flat Toggle
Current Rating (max)
6A
Ac Voltage Rating (max)
250VVAC
Dc Voltage Rating (max)
30VVDC
Contact Material
Silver Alloy
Mechanical Life
50000
Operating Temperature Min Deg. C
-30C
Operating Temperature Max Deg. C
85C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
360-1046
360-1046
360-2062
M2018ES1W01-RO
360-1046
360-2062
M2018ES1W01-RO
General Specifi cations
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Installation
Processing
Standards & Cer tifications
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991- 0942 • Fax (480) 998-1435 • www.nkkswitches.com
R
Logic/Power Level (code A):
Nominal Operating Force:
Flammability Standards:
Operating Temp Range:
Power Level (code W):
Insulation Resistance:
Logic Level (code G):
Stationary Contacts:
Movable Contactor:
Contact Resistance:
Dielectric Strength:
Movable Contacts:
Mounting Torque:
Mechanical Life:
Angle of Throw:
UL Recognized:
CSA Certifi ed:
Electrical Life:
Soldering:
Terminals:
Vibration:
Humidity:
Cleaning:
Bushing:
Sealing:
Toggle:
Shock:
Case:
6A @ 125V AC & 3A @ 250V AC
4A @ 30V DC for On-None-On & On-None-Off; 3A @ 30V DC for all other circuits
0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Combines W & G ratings
Note: Find additional explanation of dual rating & operating range in Supplement section.
10 milliohms maximum for silver; 20 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts and case for 1 minute minimum
100,000 operations minimum; 50,000 operations minimum for fl at, locking, & splashproof devices
25,000 operations minimum for silver; 50,000 operations minimum for gold;
50,000 operations minimum for silver at 3A @ 125V AC
3.92N for Single Pole; 4.41N for Double Pole; 6.86N for Three Pole; 7.85N for Four Pole
25°
Brass with chrome plating
Brass with nickel plating
Diallyl phthalate resin (UL94V–0)
Phosphor bronze with silver or gold plating
Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A)
Silver with silver plating (code W); copper or brass with gold plating (code G);
or silver with gold plating (code A)
Copper or brass with silver plating; or copper or brass with gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
Panel seal bushing options B3 & D3 meet IP67 of IEC60529 Standards.
3.0Nm (26.55 lb
1.5Nm (13 lb
For all Gold Contacts & Circuits 1, 3, 8, & 9, see Wave Soldering Profi le A in Supplement section.
Manual Soldering: 4 seconds max. @ 410°C max. Note: Lever must be in OFF (center) position.
For Silver Contact Circuits 2 & 4 through 7: Wave Soldering: 5 seconds maximum @ 270°C maximum.
Manual Soldering: 3 seconds max. @ 350°C max.
These devices are not process sealed. Hand clean locally using alcohol based solution.
See Cleaning Specifi cations in Supplement section.
UL94V–0 for case
All models recognized at 6A @ 125V AC or 3A @ 250V AC or
0.4VA maximum @ 28V DC maximum; UL File No. WOYR2.E44145;
add “/U” to end of part number to order UL mark on switch.
All models recognized at 6A @ 125V AC or 3A @ 250V AC or
0.4VA maximum @ 28V maximum; CSA File No. 023535-0-000;
add “/C” to end of part number to order CSA mark on switch.
•
2
in) double nut & 0.7Nm (6 lb
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
•
in) double nut for large bushing;
Miniature Toggles
•
in) single nut for all other bushings
Support Bracket:
Frame:
Stainless steel
Steel with tin plating
Series M
3-05