5639AB3V APEM Components, 5639AB3V Datasheet - Page 2

• Manufacturer Part Number: 5639AB3V
• Description: SWITCH TOGGLE SPDT ON-OFF-ON
• Manufacturer: APEM Components
• Series: 5000r

Specifications of 5639AB3V

• Switch Function: On-Off-On
• Termination Style: Solder Lug
• Circuit: SPDT
• Contact Rating @ Voltage: 6A @ 125VAC
• Actuator Type: Locking Lever
• Actuator Length: 15.10mm
• Illumination: Non-Illuminated
• Mounting Type: Panel Mount
• Bushing Thread: 1/4-40
• Contact Form: SPDT
• Contact Current Rating: 6 Amps at 125 Volts
• Mounting Style: Panel
• Terminal Seal: Epoxy
• Contact Plating: Silver
• Actuator: Locking Lever
• Contact Rating: 6 Amps at 125 Volts
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 5639AB3V; 679-2487

APEM
• Current/voltage rating with resistive load :
• For inductive, lamp or capacitive load, consult factory.
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
• Contact bounce : 2 ms max.
• Electrical life at full load :
• Low level or mechanical life : 100.000 cycles
• Case : diallylphthalate (DAP) or
• Actuator : brass, nickel plated
• Paddles : UL94HB polyamide
• Lever caps : vinyl
• Bushing : brass, nickel plated
• Housing : stainless steel or steel
• Contacts
• Terminal seal : epoxy
1.000 Vrms 50 Hz min. between terminals
1.500 Vrms 50 Hz min. between poles
1.500 Vrms 50 Hz min. between terminals and frame
50.000 cycles for single and double pole
40.000 cycles for 3 pole
30.000 cycles for 4 pole
high temperature plastic material
(UL94-V0)
tin plated
A : silver
AD : silver, gold plated
CD : brass, gold plated
X814 : for peak currrents, see
“Special options”.
Contact
Silver (A)
Silver,
gold plated (AD)
Brass,
gold plated (CD)
MATERIALS
3A 250VAC - 6A 125VAC - 4A 30VDC
3A 250VAC - 6A 125 VAC - 4A 30VDC
Gold plating withstands up to 100mA 30VDC
0,4 VA at 20VAC or DC
Maximum
• Torque : 1,25 Nm (.922 Ft.lb) max. applied to nut
• Panel thickness : 2,5 mm (.098) with 2 nuts - 4 mm (.157) with 1 nut
• Operating temperature : -40°C to +85°C
For VDE, refer to 55000 series.
NATO
Availability : consult factory for details of approved models.
Marking : to order switches marked UL, CSA or CECC, complete appropriate
box of ordering format. The preferential list does not appear on the switches.
EN 61058-1
ELECTRICAL SPECIFICATIONS
www.apem.com
* For details, see Technical Information, end of catalogue.
AGENCY APPROVALS
5000 series
GENERAL SPECIFICATIONS
50mA 10VDC
10mA 50mV
10μA 5V
10mA 50mV
10μA 5V
Minimum
/
PREFERENTIAL LIST
Toggle switches
I and II
III and IV
I to IV
Level*
CECC 96201-007
Specifications
A-23
A