7201K12ZQE C&K Components, 7201K12ZQE Datasheet - Page 42

• Manufacturer Part Number: 7201K12ZQE
• Description: SWITCH TOGGLE DPDT SOLDER LUG
• Manufacturer: C&K Components
• Series: 7000r

Specifications of 7201K12ZQE

• Circuit: DPDT
• Switch Function: On-On
• Contact Rating @ Voltage: 5A @ 120VAC
• Actuator Type: Locking Lever
• Actuator Length: 18.59mm
• Illumination: Non-Illuminated
• Mounting Type: Panel Mount
• Termination Style: Solder Lug
• Bushing Thread: 1/4-40
• Pole Throw Configuration: DPDT
• Switch Configuration: ON None ON
• Actuator Style: Lock Lever
• Current Rating (max): 5A
• Ac Voltage Rating (max): 250VVAC
• Dc Voltage Rating (max): 28VVDC
• Contact Material: Coin Silver
• Contact Plating: Silver
• Housing Material: N/A/Stainless Steel
• Product Height (mm): 39.93mm
• Product Depth (mm): 11.43mm
• Operating Temperature Min Deg. C: -30C
• Product Length (mm): 12.7mm
• Operating Temperature Max Deg. C: 85C
• Mounting Style: Panel
• Contact Form: DPDT
• Contact Rating: 5 Amps
• Terminal Seal: Epoxy
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: *7201K12ZQE; CKN9720

Specifications
CONTACT RATING: 0.4 VA max. @ 20 V AC or DC max.
MECHANICAL & ELECTRICAL LIFE: 40,000 make-and-break
CONTACT RESISTANCE: Below 50 m Ω typ. initial @
INSULATION RESISTANCE: 10 9 Ω min.
DIELECTRIC STRENGTH: 500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
PACKAGING: Surface mount switches shipped in anti-static
How To Order
Complete part numbers for GT Series Sealed Ultraminiature Toggle Switches are shown on pages F–43 thru F–47.
GT11MCXE
Features/Benefits
•
•
•
•
•
SPDT
cycles at full load.
2-4 V DC, 100 mA.
EIA RS-186E method 9 (1 hour steam aging).
tape and reel packaging per EIA 481-3, see page F-47 for
drawings and reel information. Tape and cover strip are
conductive for use near statically sensitive components,
consult Customer Service Center.
Sealed against solder and cleaning
process contaminants
Ultraminiature size, smallest
footprint available
Thru-hole and surface mount models
High temperature materials (UL 94V-0)
RoHS compliant and compatible
NOTE: X= Plating Option; K (tin lead) or B (gold)
Schematic
SPDT
Schematic
SPST
GT11MCXE
GT13MCXE
Conn. Terms.
GT12MCXE
Conn. Terms.
PART NUMBER
Note: Pins 4 and 6 not connected
Note: Pins 4 and 6 not connected
POS.1
OPEN
OFF
2-3
ON
ON
SWITCH FUNCTION
POS. 2
NONE
NONE
OPEN
OFF
N/A
POS. 3
ON
ON
2-1
ON
3-1
Sealed Ultraminiature Toggle Switches
Typical Applications
•
•
(4,06)
.160
Hand-held telecommunications
Small instrumentation
.170 DIA.
GT12-omit hole 2.
F–43
Materials
HOUSING AND BASE: Glass filled nylon 4/6, flame retardant,
ACTUATOR: Glass filled nylon 4/6, flame retardant, heat stabilized
SWITCH SUPPORT: Brass, tin plated.
MOVABLE CONTACTS: Copper alloy, with gold plate over
STATIONARY CONTACTS: Copper alloy, with gold plate over
TERMINALS: Gold.
TERMINAL SEAL: Epoxy. All terminals insert molded.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
.066 DIA.
heat stabilized (UL 94V-0).
(UL 94V-0), with standard internal o-ring seal.
nickel plate.
nickel plate.
(3,81)
.150
ACTUATOR SHOWN IN POS. 1
PC MOUNTING
(1,60)
.063
(5,79)
.228
C&K MARKING ON
OPPOSITE SIDE
Specifications and dimensions subject to change
.130 TYP.
(3,30)
.020 TYP.
(0,51)
.100
(2,54)
www.ck-components.com
Dimensions are shown: Inches (mm)
.015 TYP.
TERMINALS 1,3,4 & 6 ONLY
(2,54)
(4,50)
TERMINAL NOS. FOR
.100
(0,38)
.177
REFERENCE ONLY
GT Series
6
4
6
4
GT12 MODEL
3
2
1
3
1
EPOXY
SEAL
.276
(7,01)
F